Generations of Mobile Standards

3GPP Work Item mapping to Change Requests


3GPP Work Item = 60134 (GTP_enhancement)

This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.

Spec CR number and Revision CR Title
09.60 A100 rev 1 IMSI Encoding Clarification
09.60 A101 rev 1 IMSI Encoding Clarification
09.60 A102 rev 1 Re-configure the IEs in the Create PDP Context Request to make it in ascending order
09.60 A105 Clarification of the term TLLI in SGSN Context Request message
09.60 A106 Clarification of the term TLLI in SGSN Context Request message
09.60 A111 Addition of APN-OI to Inter-SGSN RAU
09.60 A112 Addition of APN-OI to Inter-SGSN RAU
23.003 0024 Moving of Annex A to 3G TS 23.003.
23.003 0063 Correction to Annex C.3 – Target ID
23.003 0064 Correction to Annex C.3 – Target ID
23.003 0065 Correction to Annex C.3 – Target ID
23.007 0008 rev 3 Change of Restart Counter definition for enhanced GTP
23.008 0049 Alignment of 23.008
23.008 0050 Alignment of 23.008
23.008 0053 Alignment of 23.008
29.060 0031 Combined on GTP enhancement
29.060 0036 rev 1 Change the attribution of the PDP Context IE
29.060 0037 Add cause value
29.060 0038 Addition of NSAPI to GGSN-initiated Update PDP Context
29.060 0045 rev 1 Removal of Anonymous Access
29.060 0046 rev 1 Clarification of Authentication Type and Import of Parameters
29.060 0048 Clarification of Information Elements
29.060 0050 rev 2 Clarification on Protocol Type in GTP Header
29.060 0052 rev 2 Method for GTP extension headers support
29.060 0053 rev 2 The addition of the conditional description of the GTP parameters
29.060 0056 Change of naming when referring to primary and secondary contexts
29.060 0067 rev 1 Distribution of security data
29.060 0069 rev 1 New cause codes for for TFT and packet filter errors
29.060 0070 IP v6 support in GTP
29.060 0072 rev 3 Clarification on the use of TEID in the GTP header
29.060 0072 rev 4 Clarification on the use of TEID in the GTP header
29.060 0075 Changing references from GSM to 3G
29.060 0076 New table for Information Elements
29.060 0077 Forward SRSN Context CR
29.060 0078 rev 1 PDCP sequence numbers in SRNC relocation and inter-system handover
29.060 0079 Removal of TCP support in the packet domain PLMN backbone network
29.060 0081 Addition of PDP Context Identifier to PDP Context Information Element
29.060 0084 16-bit PDCP sequence numbers in GTP header
29.060 0087 rev 1 Reliable delivery of signalling messages
29.060 0089 Condition for evaluating the sequence number fields in PDP context
29.060 0090 rev 1 Target RNC Information
29.060 0091 rev 1 Change of the length of TI
29.060 0093 rev 2 Clarification on the TEID handling
29.060 0096 Restart counter in Echo Response
29.060 0097 rev 1 Clarification on the use of TEID in the GTP-C header
29.060 0098 Add APN IE for PDU Notification Reject Request message
29.060 0099 rev 1 Addition of response code Delete PDP Context Response
29.060 0100 rev 1 Introduction of a different port number for GTP-C and GTP-U
29.060 0105 Race Conditions Avoidance
29.060 0105 rev 1 Race Conditions Avoidance
29.060 0106 Removal of Connection oriented paths
29.060 0108 The use of the Sequence number in GTP-C
29.060 0109 the N-PDU number in GTP-C
29.060 0110 rev 1 Editorial modifications
29.060 0111 rev 1 Editorial modifications concerning GTP-U and GTP-C
29.060 0112 Introducing Supported Extension Headers Notification to GTP-U
29.060 0113 Missing IEs in GTP-C Error Indication
29.060 0114 Clarification of the Cause of Create PDP Context Response
29.060 0115 Clarification of the TEID for Signalling
29.060 0116 Clarification on the TEID for Signalling of the PDU Notification Reject Request
29.060 0117 rev 2 Clarification of the conditional information elements
29.060 0122 rev 3 Solution for race condition of GTP procedures
29.060 0123 rev 1 Clarifications concerning the use of TEID in the Control Plane
29.060 0124 rev 1 Editorial modifications concerning TEID Control Plane and TEID Data
29.060 0126 rev 2 Sequence number in signalling messages
29.060 0127 Clarification of the conditional information elements
29.060 0128 rev 1 Enhancement of MS Network capabirity and GPRS Ciphering Algorithm
29.060 0139 rev 1 Clarifications on the use of TEID in the Control Plane
29.060 0140 Correction on the handling of the PDP Context at unsuccessful PDP Context modification
29.060 0142 Clarifications on the presence condition of TLLI/P-TMSI in SGSN Context request
29.060 0143 rev 2 Correction on Reliable transmission of signalling messages
29.060 0144 Alignment of the description of tables for Identification Request and SGSN Context Request
29.060 0145 rev 1 Correction to the SGSN Context transfer Request and response messages
29.060 0146 rev 2 Correction to the SGSN Forward relocation Request and Response messages
29.060 0147 Clarification or the handling of response messages
29.060 0148 Clarification on SGSN context acknowledge message
29.060 0149 Clarification on the use of Teardown Indicator
29.060 0150 Correction to the PDU Notification
29.060 0152 Moving informative Annex A from 3G TS 29.060 and making it normative.
29.060 0155 rev 4 Adding Uplink TEID Data I and user plane GGSN address to PDP Context IE
29.060 0162 Handling of sequence numbers for reliable transmission of control plane messages
29.060 0163 Re-configure the IEs in the PDU Notification Request to make it in ascending order
29.060 0166 Corrections to editorwork of 29.060 v 3.7.0
29.060 0170 rev 2 Clarification on the TEID value of the signalling messages
29.060 0173 rev 3 Clarifications to the GTP-U protocol
29.060 0174 rev 1 Essential Correction of the delete PDP context procedure
29.060 0178 Re-configure the IEs in the Send Routeing Information for GPRS Response message to make it in ascending order
29.060 0180 rev 1 IMSI Encoding Clarification
29.060 0182 rev 2 GSN address in Error Indication
29.060 0186 rev 1 Clarification of Error Indication
29.060 0187 Clarification on the handling of sequence numbers in the GTP user plane
29.060 0188 Clarifications and clean up of the error handling section
29.060 0191 rev 1 Clarification on the use of the term G-PDU
29.060 0195 Correction due to incorrectly implemented on the Error indication message
29.060 0196 Correction due to incorrectly implemented on the Error indication message
29.060 0203 rev 1 Clarification of the handling of Version Not Supported; Supported Extension Headers and Error Indication messages
29.060 0204 rev 1 Removal of the useless “version not supported” cause code from GTP messages
29.060 0206 Ambiguous text description of the CGF IE handling in the GTP create PDP context request message
29.060 0207 GTP Message Treatment
29.060 0208 GTP Message Treatment
29.060 0220 Clarification of the handling of Version Not Supported; Supported Extension Headers and Error Indication messages
29.060 0221 Removal of the useless “version not supported” cause code from GTP messages
29.060 0222 Ambiguous text description of the CGF IE handling in the GTP create PDP context request message
29.060 0226 Alignment of the 29.060 with the 23.060 for the SRNS Relocation procedure
29.060 0227 Alignment of the 29.060 with the 23.060 for the SRNS Relocation procedure
29.060 0232 rev 2 Clarification on the use of the teardown indicator IE
29.060 0235 Clarification of the term TLLI in SGSN Context Request message
29.060 0236 Clarification of the term TLLI in SGSN Context Request message
29.060 0237 rev 1 Rewording usage of P-TIMSI and TLLI in ”SGSN context
29.060 0238 rev 1 Rewording usage of P-TIMSI and TLLI in ”SGSN context
29.060 0239 Alignment with 23.060 on the use of SGSN Context Acknowlege message
29.060 0240 Alignment with 23.060 on the use of SGSN Context Acknowlege message
29.060 0244 rev 1 Charging Characteristics Inclusion in Create PDP Context Message
29.060 0245 rev 1 Charging Characteristics Inclusion in Create PDP Context Message
29.060 0246 Clarification to the usage of the TEID-C
29.060 0247 Clarification to the usage of the TEID-C
29.060 0248 rev 1 Clarification on the use of the teardown indicator IE
29.060 0249 Clarification on the handling of the GTP MM Context IE
29.060 0252 rev 1 Clarification on the GTP PDP context IE
29.060 0273 Clarification on the handling of the GTP MM Context IE
29.060 0274 Clarification on the GTP PDP context IE
29.060 0275 rev 1 Clarification on the handling of protocol configuration options IE
29.060 0283 Clarification on the handling of protocol configuration options IE
29.060 0298 rev 1 Clarification on PDP address field and end user address
29.060 0299 rev 1 Clarification on PDP address field and end user address
29.060 0308 Clarification on PDP address field and end user address
29.060 0312 Addition of parameter to Inter-SGSN RAU
29.060 0313 Correction on the handling of S field
29.060 0326 rev 1 Clarification on the coding of RANAP cause value
29.060 0327 rev 1 Clarification on the coding of RANAP cause value
29.060 0328 rev 1 Clarification on the coding of RANAP cause value
29.060 0345 No equivalent Cause Code in GTP to PDP context without TFT already activated
29.060 0346 No equivalent Cause Code in GTP to PDP context without TFT already activated
29.060 0347 No equivalent Cause Code in GTP to PDP context without TFT already activated
29.060 0349 Clarificatin re. Version Not Supported
29.060 0384 rev 1 Reinstatement of cause code version not supported
29.060 0385 rev 1 Reinstatement of cause code version not supported
29.060 0386 rev 1 Reinstatement of cause code version not supported
29.060 0395 rev 3 TEID for GTP-C messages related to unknown PDP Contexts
29.060 0405 rev 1 Correction for PDP Context Response with no PDP Contexts
29.060 0406 rev 1 Correction for PDP Context Response with no PDP Contexts
29.060 0407 rev 1 Correction for PDP Context Response with no PDP Contexts
29.060 0408 rev 1 Correction for PDP Context Response with no PDP Contexts
29.060 0411 rev 1 Enhancement of description for 'User authentication failed' error for Create PDP Context response message
29.060 0412 rev 1 Enhancement of description for 'User authentication failed' error for Create PDP Context response message
29.060 0419 rev 2 Definition of reserved TEID value
29.060 0420 rev 2 Definition of reserved TEID value
29.060 0421 QoS Profile Data parameter in the Quality of Service (Data) Profile IE extended with one octet
29.060 0422 QoS Profile Data parameter in the Quality of Service (Data) Profile IE extended with one octet
29.060 0431 rev 3 Enhancement of Recovery IE to reduce number of dangling PDP
29.060 0456 Removal of RAB Context IE in Forward Relocation Request
29.060 0457 Removal of RAB Context IE in Forward Relocation Request
29.060 0492 Change the attribution of Radio Priority LCS from TV to TLV
29.060 0493 Change the attribution of Radio Priority LCS from TV to TLV

page generated from database: 2024-11-12 10:16:04

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links