3GPP Work Item mapping to Change Requests
3GPP Work Item = 340040 (RANimp-16QamUplink)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
| Spec | CR number and Revision | CR Title |
|---|---|---|
| 25.101 | 0560 | UL 16QAM Relative Code Domain Error |
| 25.101 | 0561 | to 25.101 UL 16QAM modulation accuracy |
| 25.101 | 0561 rev 1 | to 25.101 UL 16QAM modulation accuracy |
| 25.101 | 0561 rev 2 | UL 16QAM Relative Code Domain Error |
| 25.101 | 0577 | Correction to UE Relative code domain power accuracy |
| 25.101 | 0577 rev 1 | Correction to UE Relative code domain power accuracy |
| 25.101 | 0578 | Correction to UE Relative code domain power accuracy |
| 25.104 | 0297 | 16QAM NodeB demodulation requirements |
| 25.133 | 0918 | Addition of E-DPCCH boosting to ETFC restriction requirements |
| 25.133 | 0918 rev 1 | Addition of E-DPCCH boosting to ETFC restriction requirements |
| 25.133 | 0919 | Addition of E-DPCCH boosting to ETFC restriction requirements |
| 25.133 | 0919 rev 1 | Addition of E-DPCCH boosting to ETFC restriction requirements |
| 25.141 | 0464 | 16QAM NodeB demodulation requirements |
| 25.201 | 0027 rev 1 | Introduction of 16QAM for HSUPA |
| 25.201 | 0027 rev 2 | Introduction of 16QAM for HSUPA |
| 25.211 | 0235 rev 1 | Introduction of 16QAM for HSUPA |
| 25.211 | 0235 rev 2 | Introduction of 16QAM for HSUPA |
| 25.212 | 0246 rev 3 | Introduction of 16QAM for HSUPA |
| 25.212 | 0246 rev 5 | Introduction of 16QAM for HSUPA |
| 25.212 | 0252 | 16QAM modulation selection for HSUPA |
| 25.212 | 0273 rev 1 | Correction to the puncturing limit allowed when UL 4PAM modulation is allowed |
| 25.212 | 0274 rev 1 | Correction to the puncturing limit allowed when UL 4PAM modulation is allowed |
| 25.213 | 0086 rev 3 | Introduction of 16QAM for HSUPA |
| 25.213 | 0086 rev 4 | Introduction of 16QAM for HSUPA |
| 25.213 | 0090 | Editorial changes in 25.213 for 16QAM specification |
| 25.213 | 0091 rev 1 | Editorial changes in 25.213 for 16QAM specification |
| 25.213 | 0092 rev 1 | Range of E-DCH amplitude ratios with QPSK |
| 25.213 | 0093 rev 1 | Range of E-DCH amplitude ratios |
| 25.213 | 0097 rev 2 | Restricted Beta Factor Combinations for EUL |
| 25.213 | 0098 | Restricted Beta Factor Combinations for EUL |
| 25.213 | 0104 rev 1 | Clarification of the quantization of E-DPDCH power offset without E-DPCCH boosting |
| 25.213 | 0105 rev 1 | Clarification of the quantization of E-DPDCH power offset without E-DPCCH boosting |
| 25.213 | 0106 | Clarification of the quantization of E-DPDCH power offset without E-DPCCH boosting |
| 25.214 | 0435 rev 3 | Introduction of 16QAM for HSUPA |
| 25.214 | 0435 rev 5 | Introduction of 16QAM for HSUPA |
| 25.214 | 0456 rev 3 | 25214 CR456r3 (Rel-7,F) Correction to Rel-7 E-DPDCH gain factor calculation |
| 25.214 | 0460 rev 2 | E-DPDCH scaling when UE is at max power |
| 25.214 | 0470 | Correction to Rel-7 E-DPDCH gain factor calculation |
| 25.214 | 0484 | Correction to E-DPCCH gain factor calculation |
| 25.214 | 0485 | Correction to E-DPCCH gain factor calculation |
| 25.214 | 0510 rev 1 | Correction to E-DPDCH gain factor interpolation in compressed mode |
| 25.214 | 0514 | Correction to E-DPDCH gain factor interpolation in compressed mode |
| 25.214 | 0516 rev 3 | Correction to E-DPDCH gain factor interpolation in compressed mode |
| 25.214 | 0517 rev 3 | Correction to E-DPDCH gain factor interpolation in compressed mode |
| 25.214 | 0523 | Correction to E-DPDCH gain factor calculation |
| 25.214 | 0525 | Clarifications to E-DPDCH scaling |
| 25.214 | 0527 | Correction to E-DPDCH gain factor calculation |
| 25.214 | 0628 rev 2 | Clarification of E-DPCCH gain factor calculation in compressed mode |
| 25.214 | 0629 rev 2 | Clarification of E-DPCCH gain factor calculation in compressed mode |
| 25.214 | 0630 rev 2 | Clarification of E-DPCCH gain factor calculation in compressed mode |
| 25.214 | 0631 rev 2 | Clarification of E-DPCCH gain factor calculation in compressed mode |
| 25.306 | 0151 rev 1 | Introduction of 16QAM in 25.306 |
| 25.306 | 0151 rev 2 | Introducing 16QAM uplink support |
| 25.306 | 0227 rev 1 | E-DCH TTI restriction for 16QAM |
| 25.306 | 0228 rev 1 | E-DCH TTI restriction for 16QAM |
| 25.319 | 0005 | 25.319 UL HOM CR |
| 25.321 | 0311 rev 1 | Introduction of 16QAM in 25.321 |
| 25.321 | 0311 rev 2 | Introducing 16QAM uplink support |
| 25.321 | 0360 | Calculation of ‘Scheduled Grant Payload’ in Rel-7 |
| 25.321 | 0369 | Clarification on SG table for 16QAM |
| 25.321 | 0486 rev 1 | Corrections to E-TFC selection in case of E-DPDCH interpolation |
| 25.321 | 0487 rev 1 | Corrections to E-TFC selection in case of E-DPDCH interpolation |
| 25.321 | 0499 rev 1 | Correction to MAC handling of AG and SG tables when 16QAM UL is configured |
| 25.321 | 0500 rev 1 | Correction to MAC handling of AG and SG tables when 16QAM UL is configured |
| 25.321 | 0682 | Corrections to Serving Grant Update procedure to support Absolute Grant value ôZero_Grantö |
| 25.321 | 0683 | Corrections to Serving Grant Update procedure to support Absolute Grant value ôZero_Grantö |
| 25.321 | 0684 | Corrections to Serving Grant Update procedure to support Absolute Grant value ôZero_Grantö |
| 25.331 | 2982 rev 2 | Introducing 16QAM uplink support |
| 25.331 | 2982 rev 6 | Introducing 16QAM uplink support |
| 25.331 | 3057 | Correction on 16 QAM Category |
| 25.331 | 3092 rev 1 | Starting and stopping operation in 16QAM mode |
| 25.331 | 3491 | Clarification for 16QAM UL E-AGCH table mapping |
| 25.331 | 3492 | Clarification for 16QAM UL E-AGCH table mapping |
| 25.331 | 3584 rev 1 | Correction to RRC handling of AG and SG tables when 16QAM UL is configured |
| 25.331 | 3585 rev 1 | Correction to RRC handling of AG and SG tables when 16QAM UL is configured |
| 25.331 | 3716 rev 1 | E-DCH TTI restriction for 16QAM |
| 25.331 | 3717 rev 1 | E-DCH TTI restriction for 16QAM |
| 25.331 | 3854 rev 1 | MAC-es/e reset when 16QAM operation starts or stops(REL-7) |
| 25.331 | 3855 rev 1 | MAC-es/e reset when 16QAM operation starts or stops(REL-8) |
| 25.331 | 3856 rev 1 | MAC-es/e reset when 16QAM operation starts or stops(REL-8) |
| 25.331 | 5234 | Introduction of enhanced serving cell change for UL 16QAM and UL 64QAM |
| 25.331 | 5570 | |
| 25.331 | 5571 | |
| 25.331 | 5579 | |
| 25.331 | 5580 | |
| 25.331 | 5581 | |
| 25.331 | 5582 | |
| 25.423 | 1271 | Introduction of Uplink Higher Order Modulation in RNSAP |
| 25.423 | 1271 rev 1 | Introduction of Uplink Higher Order Modulation in RNSAP |
| 25.423 | 1271 rev 2 | Introduction of Uplink Higher Order Modulation in RNSAP |
| 25.423 | 1271 rev 3 | Introduction of Uplink Higher Order Modulation in RNSAP |
| 25.423 | 1304 rev 1 | Extension of the range of the Reference E-TFCI Power Offset for UL 16QAM |
| 25.423 | 1305 rev 1 | Extension of the ranges of the Maximum Number of Bits per MAC-e PDU for Non-scheduled transmission and E-DCH Maximum Bitrate for UL 16QAM |
| 25.423 | 1329 | E-TFCI BetaEC Boost and E-TFCI BetaED Switch IEs updates |
| 25.423 | 1785 | Adding enhanced serving cell change support for 4C-HSDPA, 8C-HSDPA, Multflow, UL CLTD, UL MIMO, UL 16QAM and 64QAM |
| 25.423 | 1785 rev 1 | Adding enhanced serving cell change support for 4C-HSDPA, 8C-HSDPA, Multflow, UL CLTD, UL MIMO, UL 16QAM and 64QAM |
| 25.433 | 1347 | Introduction of Uplink Higher Order Modulation in NBAP |
| 25.433 | 1347 rev 1 | Introduction of Uplink Higher Order Modulation in NBAP |
| 25.433 | 1347 rev 2 | Introduction of Uplink Higher Order Modulation in NBAP |
| 25.433 | 1347 rev 3 | Introduction of Uplink Higher Order Modulation in NBAP |
| 25.433 | 1347 rev 4 | Introduction of Uplink Higher Order Modulation in NBAP |
| 25.433 | 1395 rev 1 | Extension of the range of the Reference E-TFCI Power Offset for UL 16QAM |
| 25.433 | 1396 rev 1 | Extension of the ranges of the Maximum Number of Bits per MAC-e PDU for Non-scheduled transmission and E-DCH Maximum Bitrate for UL 16QAM |
| 25.433 | 1424 | E-TFCI BetaEC Boost and E-TFCI BetaED Switch IEs updates |
| 25.433 | 1979 | Adding enhanced serving cell change support for 4C-HSDPA, 8C-HSDPA, Multflow, UL CLTD, UL MIMO, UL 16QAM and 64QAM |
| 25.433 | 1979 rev 1 | Adding enhanced serving cell change support for 4C-HSDPA, 8C-HSDPA, Multflow, UL CLTD, UL MIMO, UL 16QAM and 64QAM |
page generated from database: 2024-10-20 07:10:35