3GPP Work Item mapping to Change Requests
3GPP Work Item = 330018 (LTE-Phys)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
Spec | CR number and Revision | CR Title |
---|---|---|
25.215 | 0188 | E-UTRA measurements for UTRA – E-UTRA interworking |
25.215 | 0190 | Modification of RSRQ and removal of RSSI |
25.215 | 0192 | Modification of RSRP definition |
25.215 | 0194 rev 1 | RSRP and RSRQ Measurement Definitions |
25.215 | 0195 | Clarification on reference point of RSRP and RSRQ for EUTRA |
25.215 | 0197 rev 2 | Modification of RSRQ definition |
25.225 | 0089 | E-UTRA measurements for UTRA TDD – E-UTRA interworking |
25.225 | 0091 rev 2 | RSRP and RSRQ Measurement Definitions |
25.225 | 0092 | Clarification on reference point of RSRP and RSRQ for EUTRA |
25.225 | 0095 rev 1 | Modification of RSRQ definition |
36.201 | 0001 rev 1 | Update of 36.201 |
36.201 | 0002 | Clarification of modular operation |
36.201 | 0003 | Removing inverse modulo operation |
36.201 | 0004 rev 1 | Editorial corrections to 36.201 |
36.211 | 0001 | Introduction of optimized FS2 for TDD |
36.211 | 0002 | Introduction of scrambling sequences, uplink reference signal sequences, secondary synchronization sequences and control channel processing |
36.211 | 0003 | Update of uplink reference-signal hopping, downlink reference signals, scrambling sequences, DwPTS/UpPTS lengths for TDD and control channel processing |
36.211 | 0003 rev 1 | Update of uplink reference-signal hopping, downlink reference signals, scrambling sequences, DwPTS/UpPTS lengths for TDD and control channel processing |
36.211 | 0004 | Correction of the number of subcarriers in PUSCH transform precoding |
36.211 | 0005 | Correction of PHICH mapping |
36.211 | 0006 | Correction of PUCCH resource index for PUCCH format 2 |
36.211 | 0007 rev 2 | Correction of the predefined hopping pattern for PUSCH |
36.211 | 0007 rev 3 | Correction of the predefined hopping pattern for PUSCH |
36.211 | 0008 | Non binary hashing functions |
36.211 | 0009 rev 1 | PUCCH format 1 |
36.211 | 0010 rev 1 | UL DM RS Hopping |
36.211 | 0011 | TDD PRACH Configurations |
36.211 | 0012 | Limiting the constellation size of ACK transmission when transmitted in PUSCH |
36.211 | 0012 rev 1 | Correction to limitation of constellation size of ACK transmission in PUSCH |
36.211 | 0015 rev 1 | PHICH mapping for one and two antenna ports in extended CP |
36.211 | 0016 rev 1 | Correction of PUCCH in absent of mixed format |
36.211 | 0017 | Specification of CCE size and PHICH resource indication |
36.211 | 0018 rev 3 | Correction of the description of frame structure type 2 |
36.211 | 0019 | On Delta^pucch_shift correction |
36.211 | 0021 | Corrections to Secondary Synchronization Signal Mapping |
36.211 | 0022 | Downlink VRB mapping to PRB for distributed transmission |
36.211 | 0023 | Clarification of modulation symbols to REs mapping for DVRB |
36.211 | 0024 rev 1 | Consideration on the scrambling of PDSCH |
36.211 | 0025 | Corrections to Initialization of DL RS Scrambling |
36.211 | 0026 | on Downlink RS |
36.211 | 0026 rev 1 | on Downlink RS |
36.211 | 0027 | on Uplink RS |
36.211 | 0028 rev 1 | Fixed timing advance offset for LTE TDD and half-duplex FDD |
36.211 | 0029 rev 1 | Timing of random access preamble format 4 |
36.211 | 0030 | Uplink sounding RS bandwidth configuration |
36.211 | 0030 rev 1 | Uplink sounding RS bandwidth configuration |
36.211 | 0031 | Use of common RS when UE-specific RS are configured |
36.211 | 0032 rev 1 | Uplink RS Updates |
36.211 | 0033 | Orthogonal cover sequence for shortened PUCCH format 1a and 1b |
36.211 | 0034 | Clarification of PDCCH mapping |
36.211 | 0035 | TDD PRACH time/frequency mapping |
36.211 | 0036 | Cell Specific Uplink Sounding RS Subframe Configuration |
36.211 | 0038 | PDCCH length for carriers with mixed MBSFN and Unicast Traffic |
36.211 | 0039 | Timing advance command responding time |
36.211 | 0040 | Correction to the scrambling sequence generation for PUCCH, PCFICH, PHICH, MBSFN RS and UE specific RS |
36.211 | 0041 | PDCCH coverage in narrow bandwidths |
36.211 | 0042 | Closed-Loop and Open-Loop Spatial Multiplexing |
36.211 | 0043 | Removal of small-delay CDD |
36.211 | 0048 rev 1 | Frequency Shifting of UE-specific RS |
36.211 | 0049 rev 1 | Correction of PHICH to RE mapping in extended CP subframe |
36.211 | 0050 | Corrections to for handling remaining Res |
36.211 | 0051 | PRACH configuration for frame structure type 1 |
36.211 | 0052 rev 2 | Correction of PUCCH index generation formula |
36.211 | 0053 | Orthogonal cover sequence for shortened PUCCH format 1a and 1b |
36.211 | 0054 | Correction of mapping of ACK/NAK to binary bit values |
36.211 | 0056 rev 2 | Remaining issues on SRS hopping |
36.211 | 0057 rev 1 | Correction of n_cs(n_s) and OC/CS remapping for PUCCH formats 1/1a/1b and 2/2a/2b |
36.211 | 0059 | Corrections to Rank information scrambling in Uplink Shared Channel |
36.211 | 0060 | Definition on the slot number for frame structure type 2 |
36.211 | 0061 | Correction of the Npucch sequence upper limit for the formats 1/1a/1b |
36.211 | 0062 rev 1 | Clarifications for DMRS parameters |
36.211 | 0063 | Correction of n_prs |
36.211 | 0064 rev 1 | Introducing missing L1 parameters to 36.211 |
36.211 | 0065 rev 3 | Clarification on reception of synchronizaiton signals |
36.211 | 0066 | Correction to the downlink/uplink timing |
36.211 | 0067 | ACK/NACK Scrambling scheme on PUCCH |
36.211 | 0068 | DCI format1C |
36.211 | 0069 | Refinement for REG Definition for n = 4 |
36.211 | 0070 rev 1 | Correction for the definition of UE-specific reference signals |
36.211 | 0071 | Correcting Ncs value for PRACH preamble format 0-3 |
36.211 | 0072 rev 2 | Corrections to precoding for large delay CDD |
36.211 | 0073 | Correction of the half duplex timing advance offset value |
36.211 | 0074 | Correction to Precoding for Transmit Diversity |
36.211 | 0075 | Clarification on number of OFDM symbols used for PDCCH |
36.211 | 0077 | Number of antenna ports for PDSCH |
36.211 | 0078 | Correction to Type 2 PUSCH predetermined hopping for Nsb=1 operation |
36.211 | 0079 | PRACH frequency location |
36.211 | 0080 | Correction to the definition of nbar_oc for extended CP |
36.211 | 0081 rev 1 | Specification of reserved REs not used for RS |
36.211 | 0082 rev 2 | Clarification of the random access preamble transmission timing |
36.211 | 0083 rev 1 | Indexing of PRACH resources within the radio frame |
36.211 | 0084 rev 6 | Alignment of RAN1/RAN2 specification |
36.211 | 0086 | Clarification on scrambling of ACK/NAK bits for PUCCH format 2a/2b |
36.211 | 0087 | Correction of introduction of shortened SR |
36.211 | 0088 | Corrections to 36.211 |
36.211 | 0089 | Clarification on PUSCH DM RS Cyclic Shift Hopping |
36.211 | 0092 rev 1 | Correction to the uplink DM RS assignment |
36.211 | 0093 | Clarify the RNTI used in scrambling sequence initialization |
36.211 | 0094 rev 1 | On linkage Among UL Power Control Parameters |
36.211 | 0095 | Clarification on PUSCH pre-determined hopping pattern |
36.211 | 0096 | Clarification of SRS sequence-group and base sequence number |
36.211 | 0097 rev 1 | SRS subframe configuration |
36.211 | 0098 | Remaining SRS details for TDD |
36.211 | 0099 | Clarifying UL VRB Allocation |
36.211 | 0100 | Clarification on PUCCH resource hopping |
36.211 | 0101 | Correction for definition of Qm and a pseudo code syntax error in Scrambling. |
36.211 | 0105 rev 1 | Remaining Issues on SRS of TDD |
36.211 | 0106 | Correction of reference to RAN4 specification of supported uplink bandwidth |
36.211 | 0107 | General corrections to SRS |
36.211 | 0109 rev 2 | Correction to PCFICH specification |
36.211 | 0110 rev 1 | Correction to Layer Mapping for Transmit Diversity with Four Antenna Ports |
36.211 | 0111 | Correction of the mapping of cyclic shift filed in DCI format 0 to the dynamic cyclic shift offset |
36.211 | 0112 | DRS collision handling |
36.211 | 0113 | Clarification to enable reuse of non-active PUCCH CQI RBs for PUSCH |
36.211 | 0114 rev 1 | PUSCH Mirror Hopping operation |
36.211 | 0115 rev 1 | Alignment of PRACH configuration index for FS type 1 and type 2 |
36.211 | 0118 rev 1 | Clarification for DRS Collision handling |
36.211 | 0121 rev 1 | Removing inverse modulo operation |
36.211 | 0123 rev 1 | Clarification on the use of preamble format 4 |
36.211 | 0124 | Clarification of RNTI used in scrambling sequence |
36.211 | 0125 rev 1 | Clarifying PDCCH RE mapping |
36.211 | 0126 | Correction of preamble format 4 timing |
36.211 | 0127 rev 2 | Corrections to SRS |
36.211 | 0128 rev 2 | Clarification of PDSCH Mapping to Resource Elements |
36.211 | 0129 rev 1 | Alignment with correct ASN1 parameter names |
36.211 | 0130 | Correction to PUCCH format 1 mapping to physical resources |
36.211 | 0132 | Correction to type-2 PUSCH hopping |
36.211 | 0134 | Alignment of SRS configuration |
36.211 | 0135 | Correction on UE behavior for PRACH 20ms periodicity |
36.211 | 0137 rev 1 | Clarification on DMRS sequence for PUSCH |
36.211 | 0138 rev 1 | Correction to PHICH resource mapping for TDD and to PHICH scrambling |
36.211 | 0140 rev 3 | Editorial corrections to 36.211 |
36.211 | 0142 | Clarification of the transmit condition for UE specific reference signals |
36.211 | 0149 rev 1 | Correction on UE behavior for PRACH preamble format 4 |
36.211 | 0153 rev 2 | PUSCH interaction with periodic SRS |
36.211 | 0163 | Clarification of applicability of precoding power scaling factors for PDSCH |
36.211 | 0164 | Correction to modulation and upconversion on PRACH |
36.211 | 0169 | Correction to resource mapping for PDSCH |
36.211 | 0177 | CR to 36.211 on clarification of CSI RS mapping to resource elements |
36.211 | 0178 | CR to 36.211 on clarification of CSI RS mapping to resource elements |
36.211 | 0179 | Correction to CSI Reference Signals |
36.211 | 0180 | Correction to CSI Reference Signals |
36.211 | 0185 | Correction to QCL behaviour on CRS |
36.211 | 0186 | |
36.211 | 0187 | |
36.211 | 0188 | |
36.211 | 0188 rev 1 | |
36.211 | 0188 rev 2 | |
36.211 | 0189 | |
36.211 | 0190 | |
36.211 | 0190 rev 1 | |
36.211 | 0203 | |
36.212 | 0001 | Update of 36.212 |
36.212 | 0002 | Update to 36.212 incorporating decisions from RAN1#51bis and RAN1#52 |
36.212 | 0003 | Joint coding of CQI and ACK on PUCCH |
36.212 | 0004 rev 1 | ACK insertion into PUSCH |
36.212 | 0005 rev 1 | Introduction of format 1C |
36.212 | 0006 rev 1 | Miscellaneous fixes to 36.212 |
36.212 | 0008 rev 1 | On multiplexing scheme for indicators |
36.212 | 0009 rev 1 | On the soft buffer split of MIMO and TDD |
36.212 | 0010 | Resource assignment field for distributed VRB |
36.212 | 0011 | Clarifying the use of the different DCI formats |
36.212 | 0012 rev 1 | Clarifying the value of NL |
36.212 | 0013 | Payload size for DCI formats 3 and 3A |
36.212 | 0014 | Coding of ACK on PUSCH |
36.212 | 0015 | Coding of RI on PUSCH and mapping |
36.212 | 0015 rev 1 | Coding of RI on PUSCH and mapping |
36.212 | 0016 | CRC for control information on PUSCH |
36.212 | 0017 | Introduction of Downlink Assignment Index |
36.212 | 0018 | Coding of CQI/PMI on PUSCH coming from PUCCH |
36.212 | 0019 | Simultaneous transmission of aperiodic CQI and UL control |
36.212 | 0020 | Encoding of antenna indicator on DCI format 0 |
36.212 | 0021 | PDCCH coverage in narrow bandwidths |
36.212 | 0022 | Closed-Loop and Open-Loop Spatial Multiplexing |
36.212 | 0023 | Formula for linkage between PUSCH MCS and amount of resources used for control |
36.212 | 0026 | Correction to PUSCH Channel Interleaver |
36.212 | 0028 | Correction of mapping of ACK/NAK to binary bit values |
36.212 | 0029 | Correction to bit collection, selection and transmission |
36.212 | 0030 | Padding one bit to DCI format 1 when format 1 and format 0/1A have the same size |
36.212 | 0031 | Modification of M_limit |
36.212 | 0032 | Definition of Formats 2 and 2A |
36.212 | 0033 rev 2 | Corrections to DCI formats |
36.212 | 0035 rev 1 | Format 1B confirmation flag |
36.212 | 0036 | Corrections to Rank information scrambling in Uplink Shared Channel |
36.212 | 0037 rev 2 | Clarification of TPC commands signaled in DCI formats 3/3A |
36.212 | 0038 | Clarification on UE transmit antenna selection mask |
36.212 | 0039 rev 1 | Linking of control resources in PUSCH to data MCS |
36.212 | 0041 | Definition of Bit Mapping for DCI signalling |
36.212 | 0042 rev 1 | Clarification on resource allocation in DCI format 1/2/2A |
36.212 | 0043 | DCI Format 1A changes needed for scheduling Broadcast Control |
36.212 | 0044 | DCI format1C |
36.212 | 0045 | Miscellaneous corrections |
36.212 | 0046 | Correction on downlink multi-user MIMO |
36.212 | 0046 rev 1 | Correction on downlink multi-user MIMO |
36.212 | 0047 | Corrections to DL DCI Formats In case of Ambiguous Payload Sizes |
36.212 | 0048 | for RE provisioning for the control information in case of CQI-only transmission on PUSCH |
36.212 | 0050 rev 2 | Clarification of input bits corresponding to 2-bit HARQ-ACK and 2-bit RI |
36.212 | 0053 | Editorial corrections to 36.212 |
36.212 | 0055 | Miscellaneous Corrections |
36.212 | 0057 | Clarification of mapping of information bits |
36.212 | 0058 | Completion of 36.212 CR47 (R1-083421) for “new” DCI Formats |
36.212 | 0059 | Change for determining DCI format 1A TBS table column indicator for broadcast control |
36.212 | 0061 rev 2 | Defining DCI format 1A for downlink data arrival |
36.212 | 0063 rev 1 | ACK/NACK transmission on PUSCH for LTE TDD |
36.212 | 0065 | Correction in 36.212 related to TDD downlink HARQ processes |
36.212 | 0067 rev 1 | Correction of control MCS offset and SRS symbol puncturing |
36.212 | 0068 rev 1 | DCI format 2/2A |
36.212 | 0069 | Correction to zero padding in DCI format 1 |
36.212 | 0071 | Clarification of RI bit field mapping for PUCCH |
36.212 | 0072 | Clarifying RNTI bit mapping for PDCCH CRC scrambling |
36.212 | 0073 | Clarification on BCH transport block size |
36.212 | 0076 | Clarification on the number of PUCCH-based CQI/PMI bits when reported on PUSCH |
36.212 | 0077 rev 1 | Corrections to Transmitted Rank Indication |
36.212 | 0079 rev 1 | Correction to the bundled ACK/NACK and DAI transmission |
36.212 | 0080 rev 2 | Corrections to transmission modes |
36.212 | 0081 rev 1 | Correction on ACKNACK transmission on PUSCH for LTE TDD |
36.212 | 0082 rev 2 | Corrections to CQI and RI fields description |
36.212 | 0083 | Clarifying DCI format 1A and DCI Format 1B |
36.212 | 0087 | Clarify some parameters for determining control resources on PUSCH |
36.212 | 0088 rev 1 | Editorial corrections to 36.212 |
36.212 | 0089 | Clarification on bitwidth of RI |
36.212 | 0091 rev 2 | Coding and multiplexing of multiple ACK/NACK in PUSCH |
36.212 | 0092 rev 1 | Clarification on channel coding for UCI HARQ-ACK |
36.212 | 0094 | Correction to Channel interleaver for PUSCH RE Mapping |
36.212 | 0098 | Correction to TBS determination for DCI format 1C |
36.212 | 0101 | Correction on UE behavior upon receiving DCI format 1B |
36.212 | 0113 | Clarification on PMI indication in DCI format1B and format 2 |
36.212 | 0119 rev 1 | Corrections on transport block processing for UL-SCH |
36.212 | 0123 rev 1 | Corrections on ^^ |
36.212 | 0125 | Minor Correction on DCI Format 1 Description |
36.212 | 0126 | Correction on ACK/NACK mapping |
36.212 | 0127 | Correction on ACK/NACK mapping |
36.212 | 0133 rev 1 | Correction of two HARQ-ACK feedback on PUSCH |
36.212 | 0156 | |
36.212 | 0159 | |
36.212 | 0160 | |
36.212 | 0187 | |
36.212 | 0188 | |
36.212 | 0189 | |
36.213 | 0001 rev 2 | Update of 36.213 |
36.213 | 0002 | Update of TS36.213 according to changes listed in cover sheet |
36.213 | 0003 rev 1 | PUCCH timing and other formatting and typo corrections |
36.213 | 0006 rev 1 | PUCCH power control for non-unicast information |
36.213 | 0008 | UE ACK/NACK Procedure |
36.213 | 0009 | UL ACK/NACK timing for TDD |
36.213 | 0010 | Specification of UL control channel assignment |
36.213 | 0011 | Precoding Matrix for 2Tx Open-loop SM |
36.213 | 0012 | Clarifications on UE selected CQI reports |
36.213 | 0013 rev 1 | UL HARQ Operation and Timing |
36.213 | 0014 | SRS Power Control |
36.213 | 0015 rev 1 | Correction of UE PUSCH frequency hopping procedure |
36.213 | 0017 rev 4 | Blind PDCCH decoding |
36.213 | 0019 rev 1 | Clarification of Tx Mode vs DCI format |
36.213 | 0020 | Resource allocation for distributed VRB |
36.213 | 0021 rev 2 | Power Headroom |
36.213 | 0022 | Clarification for RI reporting in PUCCH and PUSCH reporting modes |
36.213 | 0025 | Correction of the description of PUSCH power control for TDD |
36.213 | 0026 | UL ACK/NACK procedure for TDD |
36.213 | 0027 | Indication of radio problem detection |
36.213 | 0028 | Definition of Relative Narrowband TX Power Indicator |
36.213 | 0029 | Calculation of ΔTF(i) for UL-PC |
36.213 | 0030 | CQI reference and set S definition, CQI mode removal, and Miscellanious |
36.213 | 0031 | Modulation order and TBS determination for PDSCH and PUSCH |
36.213 | 0032 | On Sounding RS |
36.213 | 0033 | Multiplexing of rank and CQI/PMI reports on PUCCH |
36.213 | 0034 | Timing advance command responding time |
36.213 | 0037 rev 2 | SRS hopping pattern for closed loop antenna selection |
36.213 | 0039 rev 2 | Clarification on uplink power control |
36.213 | 0041 | Clarification on DCI formats using resource allocation type 2 |
36.213 | 0043 rev 2 | Clarification on tree structure of CCE aggregations |
36.213 | 0046 rev 2 | Correction of the description of PUCCH power control for TDD |
36.213 | 0047 rev 1 | Removal of CR0009 |
36.213 | 0048 rev 1 | Correction of mapping of cyclic shift value to PHICH modifier |
36.213 | 0049 | TBS disabling for DCI formats 2 and 2A |
36.213 | 0050 | Correction of maximum TBS sizes |
36.213 | 0051 | Completion of the table specifying the number of bits for the periodic feedback |
36.213 | 0054 | Clarification of RNTI for PUSCH/PUCCH power control with DCI formats 3/3A |
36.213 | 0055 rev 1 | Clarification on mapping of Differential CQI fields |
36.213 | 0059 rev 1 | PUSCH Power Control |
36.213 | 0060 | RB restriction and modulation order for CQI-only transmission on PUSCH |
36.213 | 0061 | Modulation order determination for uplink retransmissions |
36.213 | 0062 rev 2 | Introducing missing L1 parameters into 36.213 |
36.213 | 0063 rev 2 | Correcting the range and representation of delta_TF_PUCCH |
36.213 | 0064 rev 1 | Adjusting TBS sizes to for VoIP |
36.213 | 0067 | Correction to the downlink resource allocation |
36.213 | 0068 | Removal of special handling for PUSCH mapping in PUCCH region |
36.213 | 0069 | Correction to the formulas for uplink power control |
36.213 | 0070 rev 1 | Definition of Bit Mapping for DCI Signalling |
36.213 | 0071 | Clarification on PUSCH TPC commands |
36.213 | 0072 rev 1 | Reference for CQI/PMI Reporting Offset |
36.213 | 0074 | Correction to the downlink/uplink timing |
36.213 | 0075 | Correction to the time alignment command |
36.213 | 0077 rev 1 | Correction of offset signalling of UL Control information MCS |
36.213 | 0078 rev 2 | DCI format1C |
36.213 | 0080 | Correction to Precoder Cycling for Open-loop Spatial Multiplexing |
36.213 | 0081 rev 1 | Clarifying Periodic CQI Reporting using PUCCH |
36.213 | 0082 rev 3 | Corrections to RI for CQI reporting |
36.213 | 0083 rev 2 | Moving description of large delay CDD to 36.211 |
36.213 | 0084 rev 1 | CQI reference measurement period |
36.213 | 0085 rev 5 | CQI report for transmission mode 7 |
36.213 | 0086 | Correction on downlink multi-user MIMO |
36.213 | 0087 | PUCCH Reporting |
36.213 | 0088 rev 1 | Handling of Uplink Grant in Random Access Response |
36.213 | 0089 | Correction to UL Hopping operation |
36.213 | 0090 | DRS EPRE |
36.213 | 0092 | Uplink ACK/NACK mapping for TDD |
36.213 | 0093 | UL SRI Parameters Configuration |
36.213 | 0094 | Miscellaneous updates for 36.213 |
36.213 | 0095 | Clarifying Requirement for Max PDSCH Coding Rate |
36.213 | 0096 | UE Specific SRS Configuration |
36.213 | 0097 | DCI Format 1A changes needed for scheduling Broadcast Control |
36.213 | 0098 | Processing of TPC bits in the random access response |
36.213 | 0100 rev 1 | Support of multi-bit ACK/NAK transmission in TDD |
36.213 | 0102 rev 3 | Reception of DCI formats |
36.213 | 0105 rev 8 | Alignment of RAN1/RAN2 specification |
36.213 | 0107 rev 1 | General correction of reset of power control and random access response message |
36.213 | 0108 rev 2 | Final details on codebook subset restrictions |
36.213 | 0108 rev 3 | Final details on codebook subset restrictions |
36.213 | 0109 | Correction on the definition of Pmax |
36.213 | 0112 rev 2 | CQI/PMI reference measurement periods |
36.213 | 0113 | Correction of introduction of shortened SR |
36.213 | 0114 | RAN1/2 specification alignment on HARQ operation |
36.213 | 0115 | Introducing other missing L1 parameters in 36.213 |
36.213 | 0116 | PDCCH blind decoding |
36.213 | 0117 | PDCCH search space |
36.213 | 0119 | Delta_TF for PUSCH |
36.213 | 0120 | Delta_preamble_msg3 parameter values and TPC command in RA response |
36.213 | 0122 rev 1 | Correction of offset signaling of uplink control information MCS |
36.213 | 0124 | Miscellaneous Corrections |
36.213 | 0125 | Clarification of the uplink index in TDD mode |
36.213 | 0126 | Clarification of the uplink transmission configurations |
36.213 | 0127 rev 2 | Correction to the PHICH index assignment |
36.213 | 0128 | Clarification of type-2 PDSCH resource allocation for format 1C |
36.213 | 0129 | Clarification of uplink grant in random access response |
36.213 | 0130 | UE sounding procedure |
36.213 | 0132 | Switching between DCI 1A and 2 |
36.213 | 0134 | Change for determining DCI format 1A TBS table column indicator for broadcast control |
36.213 | 0135 | Clarifying UL VRB Allocation |
36.213 | 0136 rev 1 | Correction for Aperiodic CQI |
36.213 | 0137 rev 1 | Correction for Aperiodic CQI Reporting |
36.213 | 0138 rev 1 | Correction to PUCCH CQI reporting mode for N^DL_RB <= 7 |
36.213 | 0140 rev 1 | On sounding procedure in TDD |
36.213 | 0141 rev 1 | Alignment of RAN1/RAN3 specification |
36.213 | 0143 rev 1 | TTI bundling |
36.213 | 0144 rev 1 | ACK/NACK transmission on PUSCH for LTE TDD |
36.213 | 0145 rev 1 | Timing relationship between PHICH and its associated PUSCH |
36.213 | 0147 rev 1 | Definition of parameter for downlink reference signal transmit power |
36.213 | 0148 rev 1 | Radio link monitoring |
36.213 | 0149 rev 1 | Correction in 36.213 related to TDD downlink HARQ processes |
36.213 | 0151 | Nominal PDSCH-to-RS EPRE Offset for CQI Reporting |
36.213 | 0152 rev 1 | Support of UL ACK/NAK repetition in Rel-8 |
36.213 | 0154 rev 1 | Corrections on codebook subset restriction for open-loop spatial multiplexing |
36.213 | 0155 | Clarification of misconfiguration of aperiodic CQI and SR |
36.213 | 0156 rev 1 | Correction of control information multiplexing in subframe bundling mode |
36.213 | 0157 | Correction to the PHICH index assignment |
36.213 | 0158 rev 1 | UE transmit antenna selection |
36.213 | 0159 | Clarification of spatial different CQI for CQI reporting Mode 2-1 |
36.213 | 0160 rev 1 | Corrections for TDD ACK/NACK bundling and multiplexing |
36.213 | 0161 | Correction to RI for Open-Loop Spatial Multiplexing |
36.213 | 0162 | Correction of differential CQI |
36.213 | 0163 | Inconsistency between PMI definition and codebook index |
36.213 | 0164 | PDCCH validation for semi-persistent scheduling |
36.213 | 0165 rev 1 | Correction to the UE behavior of PUCCH CQI piggybacked on PUSCH |
36.213 | 0166 | Correction on SRS procedure when shortened PUCCH format is used |
36.213 | 0167 rev 1 | Transmission overlapping of physical channels/signals with PDSCH for transmission mode 7 |
36.213 | 0168 rev 1 | Clarification on path loss definition |
36.213 | 0169 | Clarification of SRS and SR transmission |
36.213 | 0171 | Clarification on UE behavior when skipping decoding |
36.213 | 0172 rev 1 | PUSCH Hopping operation corrections |
36.213 | 0173 | Clarification on message 3 transmission timing |
36.213 | 0174 | MCS handling for DwPTS |
36.213 | 0175 | Clarification of UE-specific time domain position for SR transmission |
36.213 | 0176 rev 1 | Physical layer parameters for CQI reporting |
36.213 | 0177 | A-periodic CQI clarification for TDD UL/DL configuration 0 |
36.213 | 0179 rev 1 | Correction to the definitions of rho_A and rho_B (downlink power allocation) |
36.213 | 0180 | Clarification of uplink A/N resource indication |
36.213 | 0181 | PDCCH format 0 for message 3 adaptive retransmission and transmission of control information in message 3 during contention based random access procedure |
36.213 | 0182 | To Fix the Discrepancy of Uplink Power Control and Channel Coding of Control Information in PUSCH |
36.213 | 0183 | CQI reporting for antenna port 5 |
36.213 | 0183 rev 1 | CQI reporting for antenna port 5 |
36.213 | 0184 rev 1 | Corrections to Transmitted Rank Indication |
36.213 | 0185 rev 4 | Corrections to transmission modes |
36.213 | 0186 rev 2 | Delta_TF configuration for control only PUSCH |
36.213 | 0187 rev 1 | Correction to concurrent SRS and ACK/NACK transmission |
36.213 | 0191 rev 1 | PDCCH release for semi-persistent scheduling |
36.213 | 0192 rev 1 | Correction on ACKNACK transmission on PUSCH for LTE TDD |
36.213 | 0193 | Correction to subband differential CQI value to offset level mapping for aperiodic CQI reporting |
36.213 | 0194 | Correction for DRS Collision handling |
36.213 | 0196 rev 2 | Alignment of RAN1/RAN4 specification on UE maximum output power |
36.213 | 0197 | Transmission scheme for transmission mode 7 with SPS C-RNTI |
36.213 | 0198 | Clarifying bandwidth parts for periodic CQI reporting and CQI refererence period |
36.213 | 0199 rev 2 | Correction to the ACK/NACK bundling in case of transmission mode 3 and 4 |
36.213 | 0200 | ACK/NAK repetition for TDD ACK/NAK multiplexing |
36.213 | 0201 | Clarifying UL ACK/NAK transmission in TDD |
36.213 | 0202 | Corrections to UE Transmit Antenna Selection |
36.213 | 0203 | Correction to UE PUSCH hopping procedure |
36.213 | 0204 | Correction to PHICH resource association in TTI bundling |
36.213 | 0205 | Clarification of the length of resource assignment |
36.213 | 0206 | Correction on ACK/NACK transmission for downlink SPS resource release |
36.213 | 0207 | Introduction of additional values of wideband CQI/PMI periodicities |
36.213 | 0208 rev 2 | Correction to CQI/PMI/RI reporting field |
36.213 | 0209 rev 2 | Correction to rho_A definition for CQI calculation |
36.213 | 0210 | Correction to erroneous cases in PUSCH linear block codes |
36.213 | 0211 rev 1 | Removing RL monitoring start and stop |
36.213 | 0214 rev 1 | Correction to type-1 and type-2 PUSCH hopping |
36.213 | 0215 | Contradicting statements on determination of CQI subband size |
36.213 | 0216 | Corrections to SRS |
36.213 | 0219 rev 2 | Miscellaneous corrections on TDD ACKNACK |
36.213 | 0221 rev 1 | for Redundancy Version mapping function for DCI 1C |
36.213 | 0223 | Scrambling of PUSCH corresponding to Random Access Response Grant |
36.213 | 0225 | Removal of SRS with message 3 |
36.213 | 0226 rev 3 | PRACH retransmission timing |
36.213 | 0227 | Clarifying error handling of PDSCH and PUSCH assignments |
36.213 | 0228 | Clarify PHICH index mapping |
36.213 | 0229 | Correction of CQI timing |
36.213 | 0230 | Alignment of CQI parameter names with RRC |
36.213 | 0231 rev 1 | Removal of ‘Off’ values for periodic reporting in L1 |
36.213 | 0232 | Default value of RI |
36.213 | 0233 rev 1 | Clarification of uplink timing adjustments |
36.213 | 0234 | Clarification on ACK/NAK repetition |
36.213 | 0235 rev 1 | Correction to the condition of resetting accumulated uplink power correction |
36.213 | 0236 | Correction to the random access channel parameters received from higher layer |
36.213 | 0237 | Correction on TDD ACKNACK |
36.213 | 0238 rev 1 | Correction on CQI reporting |
36.213 | 0239 | Correction on the HARQ process number |
36.213 | 0241 rev 1 | correction of the description on TTI-bundling |
36.213 | 0242 rev 1 | Clarify latest and initial PDCCH for PDSCH and PUSCH transmisisons, and NDI for SPS activation |
36.213 | 0243 | Clarify DRS EPRE |
36.213 | 0244 rev 1 | Clarification on TPC commands for SPS |
36.213 | 0245 rev 1 | Correction to PUSCH hopping and PHICH mapping procedures |
36.213 | 0246 | Clarification on subband indexing in periodic CQI reporting |
36.213 | 0247 rev 2 | Correction to DVRB operation in TDD transmission mode 7 |
36.213 | 0249 | Clarification of concurrent ACKNACK and periodic PMI/RI transmission on PUCCH for TDD |
36.213 | 0250 | Clarify Inter-cell synchronization text |
36.213 | 0255 rev 5 | Editorial corrections to 36.213 |
36.213 | 0257 rev 1 | Add shorter SR periodicity |
36.213 | 0265 | Clarification for TDD when multiplexing ACK/NACK with SR of ACK/NACK with CQI/PMI or RI |
36.213 | 0294 | ACK/NACK and CQI simultaneous transmission in ACK/NACK bundling in TDD |
36.213 | 0305 rev 1 | Correction on UE behaviour upon reporting periodic CSI using PUCCH Mode1-1 |
36.213 | 0306 | Clarification for the definition of CQI |
36.213 | 0307 | Clarification for the definition of Precoding Matrix Indicator |
36.213 | 0324 rev 3 | Accumulation of power control commands from DCI format 3/3A |
36.213 | 0376 rev 1 | RNTI Configuration associated with DL Resource Allocation Type 2 |
36.213 | 0394 | Correction of reference signal scrambling sequence initialization for SPS in transmission mode 7 |
36.213 | 0395 | Correction of reference signal scrambling sequence initialization for SPS in transmission mode 7 |
36.213 | 0397 | Correction on UE procedure for reporting HARQ-ACK |
36.213 | 0398 | Correction on UE procedure for reporting HARQ-ACK |
36.213 | 0417 | Correction to PUSCH/PUCCH transmit power after PRACH power ramping |
36.213 | 0417 rev 1 | Correction to PUSCH/PUCCH transmit power after PRACH power ramping |
36.213 | 0433 | Correction to QCL behaviour on CRS |
36.213 | 0434 | Correction on PUCCH power control |
36.213 | 0441 | |
36.213 | 0446 | |
36.213 | 0447 | |
36.213 | 0456 | |
36.213 | 0456 rev 1 | |
36.213 | 0456 rev 2 | |
36.213 | 0459 rev 1 | |
36.213 | 0460 | |
36.213 | 0461 | |
36.213 | 0462 | |
36.213 | 0462 rev 1 | |
36.213 | 0471 | |
36.213 | 0493 | |
36.213 | 0493 rev 1 | |
36.213 | 0493 rev 2 | |
36.213 | 0501 | |
36.213 | 0502 | |
36.213 | 0529 | |
36.213 | 0532 | |
36.213 | 1148 | |
36.213 | 1149 | |
36.214 | 0001 rev 1 | RRC state correction for LTE UE measurements |
36.214 | 0003 rev 1 | Inclusion of agreements from RAN1#51bis and RAN1#52 |
36.214 | 0004 | Introduction of eNode B Measurement of Received Interference Power |
36.214 | 0005 | Introduction of eNode B Measurement of Thermal Noise Power |
36.214 | 0006 | Modification to the RSRP definition |
36.214 | 0007 | Modification of RSRQ and removal of RSSI |
36.214 | 0008 | RSRQ Measurement Definition |
36.214 | 0009 | RSRP and RSRQ Definitions with Receiver Diversity |
36.214 | 0010 | Clarification on reference point of RSRP and RSRQ for EUTRA |
36.214 | 0012 rev 1 | Modification of RSRQ definition |
36.214 | 0019 | Correcting inconsistency between inter-RAT UTRA measurements and requirements |
36.214 | 0019 rev 1 | Correcting inconsistency between inter-RAT UTRA measurements and requirements |
36.300 | 0356 | Correction on physical layer part on TS36.300 |
36.300 | 0566 | Correction on physical layer part on TS36.300 |
36.306 | 0032 | Correction on the definition of ue-SpecificRefSigsSupported |
36.306 | 0033 | Correction on the definition of ue-SpecificRefSigsSupported |
page generated from database: 2024-11-12 10:16:04