3GPP Work Item mapping to Change Requests
3GPP Work Item = 60134 (GTP_enhancement)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
Spec | CR number and Revision | CR Title |
---|---|---|
09.60 | A100 rev 1 | IMSI Encoding Clarification |
09.60 | A101 rev 1 | IMSI Encoding Clarification |
09.60 | A102 rev 1 | Re-configure the IEs in the Create PDP Context Request to make it in ascending order |
09.60 | A105 | Clarification of the term TLLI in SGSN Context Request message |
09.60 | A106 | Clarification of the term TLLI in SGSN Context Request message |
09.60 | A111 | Addition of APN-OI to Inter-SGSN RAU |
09.60 | A112 | Addition of APN-OI to Inter-SGSN RAU |
23.003 | 0024 | Moving of Annex A to 3G TS 23.003. |
23.003 | 0063 | Correction to Annex C.3 – Target ID |
23.003 | 0064 | Correction to Annex C.3 – Target ID |
23.003 | 0065 | Correction to Annex C.3 – Target ID |
23.007 | 0008 rev 3 | Change of Restart Counter definition for enhanced GTP |
23.008 | 0049 | Alignment of 23.008 |
23.008 | 0050 | Alignment of 23.008 |
23.008 | 0053 | Alignment of 23.008 |
29.060 | 0031 | Combined on GTP enhancement |
29.060 | 0036 rev 1 | Change the attribution of the PDP Context IE |
29.060 | 0037 | Add cause value |
29.060 | 0038 | Addition of NSAPI to GGSN-initiated Update PDP Context |
29.060 | 0045 rev 1 | Removal of Anonymous Access |
29.060 | 0046 rev 1 | Clarification of Authentication Type and Import of Parameters |
29.060 | 0048 | Clarification of Information Elements |
29.060 | 0050 rev 2 | Clarification on Protocol Type in GTP Header |
29.060 | 0052 rev 2 | Method for GTP extension headers support |
29.060 | 0053 rev 2 | The addition of the conditional description of the GTP parameters |
29.060 | 0056 | Change of naming when referring to primary and secondary contexts |
29.060 | 0067 rev 1 | Distribution of security data |
29.060 | 0069 rev 1 | New cause codes for for TFT and packet filter errors |
29.060 | 0070 | IP v6 support in GTP |
29.060 | 0072 rev 3 | Clarification on the use of TEID in the GTP header |
29.060 | 0072 rev 4 | Clarification on the use of TEID in the GTP header |
29.060 | 0075 | Changing references from GSM to 3G |
29.060 | 0076 | New table for Information Elements |
29.060 | 0077 | Forward SRSN Context CR |
29.060 | 0078 rev 1 | PDCP sequence numbers in SRNC relocation and inter-system handover |
29.060 | 0079 | Removal of TCP support in the packet domain PLMN backbone network |
29.060 | 0081 | Addition of PDP Context Identifier to PDP Context Information Element |
29.060 | 0084 | 16-bit PDCP sequence numbers in GTP header |
29.060 | 0087 rev 1 | Reliable delivery of signalling messages |
29.060 | 0089 | Condition for evaluating the sequence number fields in PDP context |
29.060 | 0090 rev 1 | Target RNC Information |
29.060 | 0091 rev 1 | Change of the length of TI |
29.060 | 0093 rev 2 | Clarification on the TEID handling |
29.060 | 0096 | Restart counter in Echo Response |
29.060 | 0097 rev 1 | Clarification on the use of TEID in the GTP-C header |
29.060 | 0098 | Add APN IE for PDU Notification Reject Request message |
29.060 | 0099 rev 1 | Addition of response code Delete PDP Context Response |
29.060 | 0100 rev 1 | Introduction of a different port number for GTP-C and GTP-U |
29.060 | 0105 | Race Conditions Avoidance |
29.060 | 0105 rev 1 | Race Conditions Avoidance |
29.060 | 0106 | Removal of Connection oriented paths |
29.060 | 0108 | The use of the Sequence number in GTP-C |
29.060 | 0109 | the N-PDU number in GTP-C |
29.060 | 0110 rev 1 | Editorial modifications |
29.060 | 0111 rev 1 | Editorial modifications concerning GTP-U and GTP-C |
29.060 | 0112 | Introducing Supported Extension Headers Notification to GTP-U |
29.060 | 0113 | Missing IEs in GTP-C Error Indication |
29.060 | 0114 | Clarification of the Cause of Create PDP Context Response |
29.060 | 0115 | Clarification of the TEID for Signalling |
29.060 | 0116 | Clarification on the TEID for Signalling of the PDU Notification Reject Request |
29.060 | 0117 rev 2 | Clarification of the conditional information elements |
29.060 | 0122 rev 3 | Solution for race condition of GTP procedures |
29.060 | 0123 rev 1 | Clarifications concerning the use of TEID in the Control Plane |
29.060 | 0124 rev 1 | Editorial modifications concerning TEID Control Plane and TEID Data |
29.060 | 0126 rev 2 | Sequence number in signalling messages |
29.060 | 0127 | Clarification of the conditional information elements |
29.060 | 0128 rev 1 | Enhancement of MS Network capabirity and GPRS Ciphering Algorithm |
29.060 | 0139 rev 1 | Clarifications on the use of TEID in the Control Plane |
29.060 | 0140 | Correction on the handling of the PDP Context at unsuccessful PDP Context modification |
29.060 | 0142 | Clarifications on the presence condition of TLLI/P-TMSI in SGSN Context request |
29.060 | 0143 rev 2 | Correction on Reliable transmission of signalling messages |
29.060 | 0144 | Alignment of the description of tables for Identification Request and SGSN Context Request |
29.060 | 0145 rev 1 | Correction to the SGSN Context transfer Request and response messages |
29.060 | 0146 rev 2 | Correction to the SGSN Forward relocation Request and Response messages |
29.060 | 0147 | Clarification or the handling of response messages |
29.060 | 0148 | Clarification on SGSN context acknowledge message |
29.060 | 0149 | Clarification on the use of Teardown Indicator |
29.060 | 0150 | Correction to the PDU Notification |
29.060 | 0152 | Moving informative Annex A from 3G TS 29.060 and making it normative. |
29.060 | 0155 rev 4 | Adding Uplink TEID Data I and user plane GGSN address to PDP Context IE |
29.060 | 0162 | Handling of sequence numbers for reliable transmission of control plane messages |
29.060 | 0163 | Re-configure the IEs in the PDU Notification Request to make it in ascending order |
29.060 | 0166 | Corrections to editorwork of 29.060 v 3.7.0 |
29.060 | 0170 rev 2 | Clarification on the TEID value of the signalling messages |
29.060 | 0173 rev 3 | Clarifications to the GTP-U protocol |
29.060 | 0174 rev 1 | Essential Correction of the delete PDP context procedure |
29.060 | 0178 | Re-configure the IEs in the Send Routeing Information for GPRS Response message to make it in ascending order |
29.060 | 0180 rev 1 | IMSI Encoding Clarification |
29.060 | 0182 rev 2 | GSN address in Error Indication |
29.060 | 0186 rev 1 | Clarification of Error Indication |
29.060 | 0187 | Clarification on the handling of sequence numbers in the GTP user plane |
29.060 | 0188 | Clarifications and clean up of the error handling section |
29.060 | 0191 rev 1 | Clarification on the use of the term G-PDU |
29.060 | 0195 | Correction due to incorrectly implemented on the Error indication message |
29.060 | 0196 | Correction due to incorrectly implemented on the Error indication message |
29.060 | 0203 rev 1 | Clarification of the handling of Version Not Supported; Supported Extension Headers and Error Indication messages |
29.060 | 0204 rev 1 | Removal of the useless “version not supported” cause code from GTP messages |
29.060 | 0206 | Ambiguous text description of the CGF IE handling in the GTP create PDP context request message |
29.060 | 0207 | GTP Message Treatment |
29.060 | 0208 | GTP Message Treatment |
29.060 | 0220 | Clarification of the handling of Version Not Supported; Supported Extension Headers and Error Indication messages |
29.060 | 0221 | Removal of the useless “version not supported” cause code from GTP messages |
29.060 | 0222 | Ambiguous text description of the CGF IE handling in the GTP create PDP context request message |
29.060 | 0226 | Alignment of the 29.060 with the 23.060 for the SRNS Relocation procedure |
29.060 | 0227 | Alignment of the 29.060 with the 23.060 for the SRNS Relocation procedure |
29.060 | 0232 rev 2 | Clarification on the use of the teardown indicator IE |
29.060 | 0235 | Clarification of the term TLLI in SGSN Context Request message |
29.060 | 0236 | Clarification of the term TLLI in SGSN Context Request message |
29.060 | 0237 rev 1 | Rewording usage of P-TIMSI and TLLI in ”SGSN context |
29.060 | 0238 rev 1 | Rewording usage of P-TIMSI and TLLI in ”SGSN context |
29.060 | 0239 | Alignment with 23.060 on the use of SGSN Context Acknowlege message |
29.060 | 0240 | Alignment with 23.060 on the use of SGSN Context Acknowlege message |
29.060 | 0244 rev 1 | Charging Characteristics Inclusion in Create PDP Context Message |
29.060 | 0245 rev 1 | Charging Characteristics Inclusion in Create PDP Context Message |
29.060 | 0246 | Clarification to the usage of the TEID-C |
29.060 | 0247 | Clarification to the usage of the TEID-C |
29.060 | 0248 rev 1 | Clarification on the use of the teardown indicator IE |
29.060 | 0249 | Clarification on the handling of the GTP MM Context IE |
29.060 | 0252 rev 1 | Clarification on the GTP PDP context IE |
29.060 | 0273 | Clarification on the handling of the GTP MM Context IE |
29.060 | 0274 | Clarification on the GTP PDP context IE |
29.060 | 0275 rev 1 | Clarification on the handling of protocol configuration options IE |
29.060 | 0283 | Clarification on the handling of protocol configuration options IE |
29.060 | 0298 rev 1 | Clarification on PDP address field and end user address |
29.060 | 0299 rev 1 | Clarification on PDP address field and end user address |
29.060 | 0308 | Clarification on PDP address field and end user address |
29.060 | 0312 | Addition of parameter to Inter-SGSN RAU |
29.060 | 0313 | Correction on the handling of S field |
29.060 | 0326 rev 1 | Clarification on the coding of RANAP cause value |
29.060 | 0327 rev 1 | Clarification on the coding of RANAP cause value |
29.060 | 0328 rev 1 | Clarification on the coding of RANAP cause value |
29.060 | 0345 | No equivalent Cause Code in GTP to PDP context without TFT already activated |
29.060 | 0346 | No equivalent Cause Code in GTP to PDP context without TFT already activated |
29.060 | 0347 | No equivalent Cause Code in GTP to PDP context without TFT already activated |
29.060 | 0349 | Clarificatin re. Version Not Supported |
29.060 | 0384 rev 1 | Reinstatement of cause code version not supported |
29.060 | 0385 rev 1 | Reinstatement of cause code version not supported |
29.060 | 0386 rev 1 | Reinstatement of cause code version not supported |
29.060 | 0395 rev 3 | TEID for GTP-C messages related to unknown PDP Contexts |
29.060 | 0405 rev 1 | Correction for PDP Context Response with no PDP Contexts |
29.060 | 0406 rev 1 | Correction for PDP Context Response with no PDP Contexts |
29.060 | 0407 rev 1 | Correction for PDP Context Response with no PDP Contexts |
29.060 | 0408 rev 1 | Correction for PDP Context Response with no PDP Contexts |
29.060 | 0411 rev 1 | Enhancement of description for 'User authentication failed' error for Create PDP Context response message |
29.060 | 0412 rev 1 | Enhancement of description for 'User authentication failed' error for Create PDP Context response message |
29.060 | 0419 rev 2 | Definition of reserved TEID value |
29.060 | 0420 rev 2 | Definition of reserved TEID value |
29.060 | 0421 | QoS Profile Data parameter in the Quality of Service (Data) Profile IE extended with one octet |
29.060 | 0422 | QoS Profile Data parameter in the Quality of Service (Data) Profile IE extended with one octet |
29.060 | 0431 rev 3 | Enhancement of Recovery IE to reduce number of dangling PDP |
29.060 | 0456 | Removal of RAB Context IE in Forward Relocation Request |
29.060 | 0457 | Removal of RAB Context IE in Forward Relocation Request |
29.060 | 0492 | Change the attribution of Radio Priority LCS from TV to TLV |
29.060 | 0493 | Change the attribution of Radio Priority LCS from TV to TLV |
page generated from database: 2024-11-12 10:16:04