3GPP Work Item mapping to Change Requests
3GPP Work Item = 460103 (MDT_UMTSLTE-Core)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
Spec | CR number and Revision | CR Title |
---|---|---|
25.123 | 0497 | Introduction of MDT UE measurements requirements for LCR TDD in TS25.123 |
25.123 | 0497 rev 1 | Introduction of MDT UE measurements requirements for LCR TDD in TS25.123 |
25.123 | 0526 | Timestamp Accuracy Requirements for MDT |
25.133 | 1077 | Requirements for Minimization of Drive Tests (MDT) in UMTS |
25.133 | 1079 | Introduction of MDT in 25.133 |
25.133 | 1085 | Timestamp accuracy requirements for MDT |
25.133 | 1085 rev 1 | Requirements for Minimization of Drive Tests (MDT) in UMTS |
25.133 | 1089 | Requirements for Minimization of Drive Tests (MDT) in UMTS |
25.133 | 1110 | CR Timestamp accuracy requirements for MDT |
25.304 | 0270 | Introduction of Minimization of Drive Tests |
25.304 | 0277 rev 1 | Correction for definition of MDT PLMN |
25.304 | 0295 | Clean up MDT text |
25.304 | 0365 | |
25.306 | 0295 | Counter proposal to R2-110749 on UE capabilities for MDT |
25.306 | 0446 | |
25.331 | 4461 rev 1 | UE Capabilities for MDT |
25.331 | 4533 rev 2 | Introduction of Minimization of Drive Tests |
25.331 | 4611 | TCE ID parameter for logged MDT |
25.331 | 4662 rev 1 | Clarification on PLMN checking for MDT logging |
25.331 | 4718 | Update to RRC performance values for UE Information procedure |
25.331 | 5376 | Clarification on UE Information procedure |
25.331 | 5377 | Clarification on UE Information procedure |
25.331 | 5514 | |
25.331 | 5764 | |
25.401 | 0136 | Support for MDT |
25.401 | 0136 rev 1 | Support for MDT |
25.410 | 0074 | Support for MDT |
25.410 | 0074 rev 1 | Support for MDT |
25.413 | 1094 | Introduction of MDT |
25.413 | 1094 rev 1 | Introduction of MDT |
25.413 | 1102 | User consent indication for MDT in RANAP |
25.413 | 1102 rev 1 | User consent indication for MDT in RANAP |
25.413 | 1103 | Addition of CN Invoke Trace Failure procedure |
25.413 | 1104 | User consent indication for MDT in RANAP |
25.413 | 1104 rev 1 | User consent indication for MDT in RANAP |
25.413 | 1104 rev 2 | User consent indication for MDT in RANAP |
25.413 | 1104 rev 3 | User consent indication for MDT in RANAP |
25.413 | 1109 | Clarification of Area scope handling of MDT |
25.413 | 1110 | The name correction of MDT Parameters IE |
25.413 | 1118 | MDT UTRAN amendments |
25.413 | 1118 rev 1 | MDT UTRAN amendments |
25.413 | 1118 rev 2 | MDT UTRAN amendments |
25.413 | 1121 | Addition of CN Invoke Trace Failure procedure |
25.413 | 1122 | Correct definition of condition IfM2 in MDT Configuration |
25.413 | 1123 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.413 | 1123 rev 1 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.413 | 1123 rev 2 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.413 | 1123 rev 3 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.413 | 1124 | Area scope RAI list in MDT configuration |
25.413 | 1124 rev 1 | Area scope RAI list in MDT configuration |
25.413 | 1124 rev 2 | Area scope RAI list in MDT configuration |
25.413 | 1125 | Global Cell ID list and PLMN list in MDT configuration |
25.413 | 1130 | Definition of value of bit in Measurements to Activate |
25.413 | 1130 rev 1 | Definition of value of bit in Measurements to Activate |
25.413 | 1130 rev 2 | Definition of value of bit in Measurements to Activate |
25.413 | 1137 | MDT Support for EPLMN |
25.413 | 1141 | Addition of TCE IP in CN INVOKE TRACE |
25.413 | 1141 rev 1 | Addition of TCE IP in CN INVOKE TRACE |
25.413 | 1141 rev 2 | Addition of TCE IP in CN INVOKE TRACE |
25.413 | 1207 | Adding restriction on Management Based MDT Allowed IE propagation |
25.413 | 1207 rev 1 | Adding restriction on Management Based MDT Allowed IE propagation |
25.423 | 1667 | Introduction of MDT |
25.423 | 1667 rev 1 | Introduction of MDT |
25.423 | 1679 | Clarification of Area scope handling of MDT |
25.423 | 1680 | Immediate MDT in the case of inter-PLMN Iur HO |
25.423 | 1699 | Clarification on M1 and M2 in MDT Configuration over Iur |
25.423 | 1699 rev 1 | Clarification on M1 and M2 in MDT Configuration over Iur |
25.423 | 1700 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.423 | 1700 rev 1 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.423 | 1700 rev 2 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.423 | 1700 rev 3 | Clarification on MDT Recording Session Reference in MDT Configuration |
25.423 | 1701 | Area scope RAI list in MDT configuration |
25.423 | 1701 rev 1 | Area scope RAI list in MDT configuration |
25.423 | 1701 rev 2 | Area scope RAI list in MDT configuration |
25.423 | 1702 | Global Cell ID list and PLMN list in MDT configuration |
25.423 | 1712 | MDT Support for EPLMN |
25.423 | 1715 | Addition of TCE IP in IUR INVOKE TRACE |
25.423 | 1715 rev 1 | Addition of TCE IP in IUR INVOKE TRACE |
25.423 | 1715 rev 2 | Addition of TCE IP in IUR INVOKE TRACE |
25.423 | 1776 | Erroneous addition of MDT configuration to Iur |
25.423 | 1777 | Erroneous addition of MDT configuration to Iur |
25.423 | 1791 | Erroneous addition of MDT configuration to Iur |
25.423 | 1791 rev 1 | Erroneous addition of MDT configuration to Iur |
25.423 | 1792 | Erroneous addition of MDT configuration to Iur |
25.423 | 1792 rev 1 | Erroneous addition of MDT configuration to Iur |
25.433 | 1871 | Alignment of report periodicity for MDT |
36.133 | 0653 | Requirements for Minimization of Drive Tests (MDT) in LTE |
36.133 | 0656 | Introduction of MDT in 36.133 |
36.133 | 0697 | Timestamp accuracy requirements for MDT |
36.133 | 0697 rev 1 | Timestamp accuracy requirements for MDT |
36.133 | 0740 | Requirements for Minimization of Drive Tests (MDT) in LTE |
36.133 | 0850 | CR Timestamp accuracy requirements for MDT |
36.300 | 0348 | Support for MDT |
36.300 | 0370 rev 1 | Introduction of the RLF report |
36.304 | 0140 rev 2 | 36.304 CR on MDT |
36.304 | 0155 rev 1 | Clean up of MDT related text |
36.306 | 0043 | Counter proposal to R2-110795 on UE capabilities for MDT |
36.331 | 0476 rev 3 | Introduction of Minimization of Drive Tests |
36.331 | 0476 rev 4 | 36.331 CR on Introduction of Minimization of Drive Tests |
36.331 | 0533 | 36331_CRxxx_Protection of Logged Measurements Configuration |
36.331 | 0535 | Clean up MDT-related text |
36.331 | 0536 | Clear MDT configuration and logs when the UE is not registered |
36.331 | 0539 | CR to 36.331 on corrections for MDT |
36.331 | 0544 | MDT PDU related clarifications |
36.331 | 0545 | Correction on release of logged measurement configuration while in another RAT |
36.331 | 0549 rev 1 | Memory size for logged measurements capable UE |
36.331 | 0554 rev 1 | Removal of MDT configuration at T330 expiry |
36.331 | 0596 | Validity time for location information in Immediate MDT |
36.331 | 0604 | CR to 36.331 on MDT neighbour cell measurements logging |
36.331 | 0615 | Release of Logged Measurement Configuration |
36.331 | 0624 | Counter proposal to R2-110826 on UE capabilities for MDT |
36.331 | 0632 rev 1 | Trace configuration paremeters for Logged MDT |
36.331 | 0635 | Clarification on stop condition for timer T3330 |
36.331 | 0637 | User consent for MDT |
36.331 | 0673 | Introduction of TCE ID for logged MDT |
36.331 | 0675 | PLMN check for MDT logging |
36.410 | 0018 | Support for MDT |
36.413 | 0815 | Support for MDT |
36.413 | 0815 rev 1 | Support for MDT |
36.413 | 0815 rev 2 | Support for MDT |
36.413 | 0849 | User consent indication for MDT in S1AP |
36.413 | 0849 rev 1 | User consent indication for MDT in S1AP |
36.413 | 0865 | MDT correction for TAI |
36.413 | 0865 rev 1 | MDT correction for TAI |
36.413 | 0873 | Incorrect inclusion of Logged MDT configuration |
36.413 | 0876 | User consent indication for MDT in S1AP |
36.413 | 0876 rev 1 | User consent indication for MDT in S1AP |
36.413 | 0897 | Clarification of Area scope handling of MDT |
36.413 | 0898 | ASN.1 related improvements for MDT |
36.413 | 0899 | Handling of activation failure cases for Logged and Immediate MDT |
36.413 | 0899 rev 1 | Handling of activation failure cases for Logged and Immediate MDT |
36.413 | 0900 | Support for MDT user consent |
36.413 | 0900 rev 1 | Support for MDT user consent |
36.413 | 0900 rev 2 | Support for MDT user consent |
36.413 | 0900 rev 3 | Support for MDT user consent |
36.413 | 0902 | Removal of MDT M3 measurement |
36.413 | 0911 | MDT amendments |
36.413 | 0911 rev 1 | MDT amendments |
36.413 | 0911 rev 2 | MDT amendments |
36.413 | 0912 | Correction of trace function and trace session |
36.413 | 0912 rev 1 | Correction of trace function and trace session |
36.413 | 0916 | Clarification on logged MDT configuration transfer during S1 handover procedure |
36.413 | 0917 | Adding TAI list and PLMN list in area scope for inter-PLMN MDT |
36.413 | 0918 | Introduce explicit PLMN list for MDT |
36.413 | 0924 | Definition of value of bit in Measurements to Activate |
36.413 | 0924 rev 1 | Definition of value of bit in Measurements to Activate |
36.413 | 0924 rev 2 | Definition of value of bit in Measurements to Activate |
36.413 | 0937 | Handling of activation failure cases for Logged and Immediate MDT |
36.413 | 0938 | Alignment on privacy requirements for MDT |
36.413 | 0939 | MDT Support for EPLMN |
36.413 | 0949 | Update of MDT user consent |
36.413 | 0954 | Alignment on privacy requirements for MDT |
36.413 | 0954 rev 1 | Alignment on privacy requirements for MDT |
36.413 | 0954 rev 2 | Alignment on privacy requirements for MDT |
36.413 | 0954 rev 3 | Alignment on privacy requirements for MDT |
36.413 | 0957 | MDT user consent updating via X2 handover |
36.423 | 0413 | Support for MDT |
36.423 | 0413 rev 1 | Support for MDT |
36.423 | 0413 rev 2 | Support for MDT |
36.423 | 0428 | User consent indication for MDT in X2AP |
36.423 | 0428 rev 1 | User consent indication for MDT in X2AP |
36.423 | 0435 | Correction of trace function and trace session |
36.423 | 0435 rev 1 | MDT correction for TAI |
36.423 | 0439 | User consent indication for MDT in X2AP |
36.423 | 0439 rev 1 | User consent indication for MDT in X2AP |
36.423 | 0439 rev 2 | User consent indication for MDT in X2AP |
36.423 | 0442 | Clarification of Area scope handling of MDT |
36.423 | 0444 | Immediate MDT in the case of inter-PLMN X2 HO |
36.423 | 0446 | ASN.1 related improvements for MDT |
36.423 | 0447 | Support for MDT user consent |
36.423 | 0447 rev 1 | Support for MDT user consent |
36.423 | 0447 rev 2 | Support for MDT user consent |
36.423 | 0447 rev 3 | Support for MDT user consent |
36.423 | 0448 | Removal of MDT M3 measurement |
36.423 | 0453 | MDT amendments |
36.423 | 0453 rev 1 | MDT amendments |
36.423 | 0453 rev 2 | MDT amendments |
36.423 | 0456 | Correction of trace function and trace session |
36.423 | 0460 | Remove the restriction on the transfer of MDT user consent over X2 |
36.423 | 0461 | Adding TAI list and PLMN list in area scope for inter-PLMN MDT |
36.423 | 0462 | Inter-PLMN MDT at X2 handover |
36.423 | 0465 | Remove PLMN check for MDT consent propagation at HO |
36.423 | 0466 | Introduce explicit PLMN list for MDT |
36.423 | 0466 rev 1 | Introduce explicit PLMN list for MDT |
36.423 | 0477 | MDT Support for EPLMN |
36.423 | 0478 | Definition of value of bit in Measurements to Activate |
36.423 | 0478 rev 1 | Definition of value of bit in Measurements to Activate |
37.320 | 0001 | Clarifications on MDT initiation |
37.320 | 0002 | Clear MDT configuration and logs when the UE is not registered |
37.320 | 0003 rev 1 | MDT stage 2 clarifications |
37.320 | 0004 | On memory size limitation for Logged MDT |
37.320 | 0005 | UE Capabilities for MDT |
37.320 | 0006 | Validity time for location information in Immediate MDT |
37.320 | 0008 | Correction to include CDMA2000 reporting for neighbouring cells |
37.320 | 0012 | Small Carifications and Corrections to 37.320 |
37.320 | 0013 | Trace parameters for MDT configuration |
37.320 | 0014 | Clarification for logged MDT measurement configuration effectiveness |
37.320 | 0015 | Correction of log availability reporting |
37.320 | 0016 | Immediate MDT context handling during inter-PLMN handover |
37.320 | 0017 rev 1 | MDT Uplink Network measurements |
37.320 | 0018 | Signalling based Immediate MDT initiation with area scope configuration |
37.320 | 0019 | TCE ID parameter for logged MDT |
37.320 | 0020 | Miscellaneous corrections to 37.320 |
37.320 | 0025 rev 1 | MDT Stage-2 Cleanup |
37.320 | 0026 rev 1 | Introduction of the User consent |
37.320 | 0027 | CR to 37.320 to clean up description of RLF Reporting |
37.320 | 0033 | Immediate MDT context handling during inter-PLMN handover |
37.320 | 0034 | Miscellaneous corrections to 37.320 |
37.320 | 0037 | Editorial corrections |
37.320 | 0038 | CR to 37.320 on Immediate MDT handling at handover |
37.320 | 0039 | Small Corrections to 37.320 |
37.320 | 0061 |
page generated from database: 2024-11-12 10:16:04