Generations of Mobile Standards

3GPP Work Item mapping to Change Requests


3GPP Work Item = 330018 (LTE-Phys)

This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.

Spec CR number and Revision CR Title
25.215 0188 E-UTRA measurements for UTRA – E-UTRA interworking
25.215 0190 Modification of RSRQ and removal of RSSI
25.215 0192 Modification of RSRP definition
25.215 0194 rev 1 RSRP and RSRQ Measurement Definitions
25.215 0195 Clarification on reference point of RSRP and RSRQ for EUTRA
25.215 0197 rev 2 Modification of RSRQ definition
25.225 0089 E-UTRA measurements for UTRA TDD – E-UTRA interworking
25.225 0091 rev 2 RSRP and RSRQ Measurement Definitions
25.225 0092 Clarification on reference point of RSRP and RSRQ for EUTRA
25.225 0095 rev 1 Modification of RSRQ definition
36.201 0001 rev 1 Update of 36.201
36.201 0002 Clarification of modular operation
36.201 0003 Removing inverse modulo operation
36.201 0004 rev 1 Editorial corrections to 36.201
36.211 0001 Introduction of optimized FS2 for TDD
36.211 0002 Introduction of scrambling sequences, uplink reference signal sequences, secondary synchronization sequences and control channel processing
36.211 0003 Update of uplink reference-signal hopping, downlink reference signals, scrambling sequences, DwPTS/UpPTS lengths for TDD and control channel processing
36.211 0003 rev 1 Update of uplink reference-signal hopping, downlink reference signals, scrambling sequences, DwPTS/UpPTS lengths for TDD and control channel processing
36.211 0004 Correction of the number of subcarriers in PUSCH transform precoding
36.211 0005 Correction of PHICH mapping
36.211 0006 Correction of PUCCH resource index for PUCCH format 2
36.211 0007 rev 2 Correction of the predefined hopping pattern for PUSCH
36.211 0007 rev 3 Correction of the predefined hopping pattern for PUSCH
36.211 0008 Non binary hashing functions
36.211 0009 rev 1 PUCCH format 1
36.211 0010 rev 1 UL DM RS Hopping
36.211 0011 TDD PRACH Configurations
36.211 0012 Limiting the constellation size of ACK transmission when transmitted in PUSCH
36.211 0012 rev 1 Correction to limitation of constellation size of ACK transmission in PUSCH
36.211 0015 rev 1 PHICH mapping for one and two antenna ports in extended CP
36.211 0016 rev 1 Correction of PUCCH in absent of mixed format
36.211 0017 Specification of CCE size and PHICH resource indication
36.211 0018 rev 3 Correction of the description of frame structure type 2
36.211 0019 On Delta^pucch_shift correction
36.211 0021 Corrections to Secondary Synchronization Signal Mapping
36.211 0022 Downlink VRB mapping to PRB for distributed transmission
36.211 0023 Clarification of modulation symbols to REs mapping for DVRB
36.211 0024 rev 1 Consideration on the scrambling of PDSCH
36.211 0025 Corrections to Initialization of DL RS Scrambling
36.211 0026 on Downlink RS
36.211 0026 rev 1 on Downlink RS
36.211 0027 on Uplink RS
36.211 0028 rev 1 Fixed timing advance offset for LTE TDD and half-duplex FDD
36.211 0029 rev 1 Timing of random access preamble format 4
36.211 0030 Uplink sounding RS bandwidth configuration
36.211 0030 rev 1 Uplink sounding RS bandwidth configuration
36.211 0031 Use of common RS when UE-specific RS are configured
36.211 0032 rev 1 Uplink RS Updates
36.211 0033 Orthogonal cover sequence for shortened PUCCH format 1a and 1b
36.211 0034 Clarification of PDCCH mapping
36.211 0035 TDD PRACH time/frequency mapping
36.211 0036 Cell Specific Uplink Sounding RS Subframe Configuration
36.211 0038 PDCCH length for carriers with mixed MBSFN and Unicast Traffic
36.211 0039 Timing advance command responding time
36.211 0040 Correction to the scrambling sequence generation for PUCCH, PCFICH, PHICH, MBSFN RS and UE specific RS
36.211 0041 PDCCH coverage in narrow bandwidths
36.211 0042 Closed-Loop and Open-Loop Spatial Multiplexing
36.211 0043 Removal of small-delay CDD
36.211 0048 rev 1 Frequency Shifting of UE-specific RS
36.211 0049 rev 1 Correction of PHICH to RE mapping in extended CP subframe
36.211 0050 Corrections to for handling remaining Res
36.211 0051 PRACH configuration for frame structure type 1
36.211 0052 rev 2 Correction of PUCCH index generation formula
36.211 0053 Orthogonal cover sequence for shortened PUCCH format 1a and 1b
36.211 0054 Correction of mapping of ACK/NAK to binary bit values
36.211 0056 rev 2 Remaining issues on SRS hopping
36.211 0057 rev 1 Correction of n_cs(n_s) and OC/CS remapping for PUCCH formats 1/1a/1b and 2/2a/2b
36.211 0059 Corrections to Rank information scrambling in Uplink Shared Channel
36.211 0060 Definition on the slot number for frame structure type 2
36.211 0061 Correction of the Npucch sequence upper limit for the formats 1/1a/1b
36.211 0062 rev 1 Clarifications for DMRS parameters
36.211 0063 Correction of n_prs
36.211 0064 rev 1 Introducing missing L1 parameters to 36.211
36.211 0065 rev 3 Clarification on reception of synchronizaiton signals
36.211 0066 Correction to the downlink/uplink timing
36.211 0067 ACK/NACK Scrambling scheme on PUCCH
36.211 0068 DCI format1C 
36.211 0069 Refinement for REG Definition for n = 4
36.211 0070 rev 1 Correction for the definition of UE-specific reference signals
36.211 0071 Correcting Ncs value for PRACH preamble format 0-3
36.211 0072 rev 2 Corrections to precoding for large delay CDD
36.211 0073 Correction of the half duplex timing advance offset value
36.211 0074 Correction to Precoding for Transmit Diversity
36.211 0075 Clarification on number of OFDM symbols used for PDCCH
36.211 0077 Number of antenna ports for PDSCH
36.211 0078 Correction to Type 2 PUSCH predetermined hopping for Nsb=1 operation
36.211 0079 PRACH frequency location
36.211 0080 Correction to the definition of nbar_oc for extended CP
36.211 0081 rev 1 Specification of reserved REs not used for RS
36.211 0082 rev 2 Clarification of the random access preamble transmission timing
36.211 0083 rev 1 Indexing of PRACH resources within the radio frame
36.211 0084 rev 6 Alignment of RAN1/RAN2 specification
36.211 0086 Clarification on scrambling of ACK/NAK bits for PUCCH format 2a/2b
36.211 0087 Correction of introduction of shortened SR
36.211 0088 Corrections to 36.211
36.211 0089 Clarification on PUSCH DM RS Cyclic Shift Hopping
36.211 0092 rev 1 Correction to the uplink DM RS assignment
36.211 0093 Clarify the RNTI used in scrambling sequence initialization
36.211 0094 rev 1 On linkage Among UL Power Control Parameters
36.211 0095 Clarification on PUSCH pre-determined hopping pattern
36.211 0096 Clarification of SRS sequence-group and base sequence number
36.211 0097 rev 1 SRS subframe configuration
36.211 0098 Remaining SRS details for TDD
36.211 0099 Clarifying UL VRB Allocation
36.211 0100 Clarification on PUCCH resource hopping
36.211 0101 Correction for definition of Qm and a pseudo code syntax error in Scrambling.
36.211 0105 rev 1 Remaining Issues on SRS of TDD
36.211 0106 Correction of reference to RAN4 specification of supported uplink bandwidth
36.211 0107 General corrections to SRS
36.211 0109 rev 2 Correction to PCFICH specification
36.211 0110 rev 1 Correction to Layer Mapping for Transmit Diversity with Four Antenna Ports
36.211 0111 Correction of the mapping of cyclic shift filed in DCI format 0 to the dynamic cyclic shift offset
36.211 0112 DRS collision handling
36.211 0113 Clarification to enable reuse of non-active PUCCH CQI RBs for PUSCH
36.211 0114 rev 1 PUSCH Mirror Hopping operation
36.211 0115 rev 1 Alignment of PRACH configuration index for FS type 1 and type 2
36.211 0118 rev 1 Clarification for DRS Collision handling
36.211 0121 rev 1 Removing inverse modulo operation
36.211 0123 rev 1 Clarification on the use of preamble format 4
36.211 0124 Clarification of RNTI used in scrambling sequence
36.211 0125 rev 1 Clarifying PDCCH RE mapping
36.211 0126 Correction of preamble format 4 timing
36.211 0127 rev 2 Corrections to SRS
36.211 0128 rev 2 Clarification of PDSCH Mapping to Resource Elements
36.211 0129 rev 1 Alignment with correct ASN1 parameter names
36.211 0130 Correction to PUCCH format 1 mapping to physical resources
36.211 0132 Correction to type-2 PUSCH hopping
36.211 0134 Alignment of SRS configuration
36.211 0135 Correction on UE behavior for PRACH 20ms periodicity
36.211 0137 rev 1 Clarification on DMRS sequence for PUSCH
36.211 0138 rev 1 Correction to PHICH resource mapping for TDD and to PHICH scrambling
36.211 0140 rev 3 Editorial corrections to 36.211
36.211 0142 Clarification of the transmit condition for UE specific reference signals
36.211 0149 rev 1 Correction on UE behavior for PRACH preamble format 4
36.211 0153 rev 2 PUSCH interaction with periodic SRS
36.211 0163 Clarification of applicability of precoding power scaling factors for PDSCH
36.211 0164 Correction to modulation and upconversion on PRACH
36.211 0169 Correction to resource mapping for PDSCH
36.211 0177 CR to 36.211 on clarification of CSI RS mapping to resource elements
36.211 0178 CR to 36.211 on clarification of CSI RS mapping to resource elements
36.211 0179 Correction to CSI Reference Signals
36.211 0180 Correction to CSI Reference Signals
36.211 0185 Correction to QCL behaviour on CRS
36.211 0186
36.211 0187
36.211 0188
36.211 0188 rev 1
36.211 0188 rev 2
36.211 0189
36.211 0190
36.211 0190 rev 1
36.211 0203
36.212 0001 Update of 36.212
36.212 0002 Update to 36.212 incorporating decisions from RAN1#51bis and RAN1#52
36.212 0003 Joint coding of CQI and ACK on PUCCH
36.212 0004 rev 1 ACK insertion into PUSCH
36.212 0005 rev 1 Introduction of format 1C
36.212 0006 rev 1 Miscellaneous fixes to 36.212
36.212 0008 rev 1 On multiplexing scheme for indicators
36.212 0009 rev 1 On the soft buffer split of MIMO and TDD
36.212 0010 Resource assignment field for distributed VRB
36.212 0011 Clarifying the use of the different DCI formats
36.212 0012 rev 1 Clarifying the value of NL
36.212 0013 Payload size for DCI formats 3 and 3A
36.212 0014 Coding of ACK on PUSCH
36.212 0015 Coding of RI on PUSCH and mapping
36.212 0015 rev 1 Coding of RI on PUSCH and mapping
36.212 0016 CRC for control information on PUSCH
36.212 0017 Introduction of Downlink Assignment Index
36.212 0018 Coding of CQI/PMI on PUSCH coming from PUCCH
36.212 0019 Simultaneous transmission of aperiodic CQI and UL control
36.212 0020 Encoding of antenna indicator on DCI format 0
36.212 0021 PDCCH coverage in narrow bandwidths
36.212 0022 Closed-Loop and Open-Loop Spatial Multiplexing
36.212 0023 Formula for linkage between PUSCH MCS and amount of resources used for control
36.212 0026 Correction to PUSCH Channel Interleaver
36.212 0028 Correction of mapping of ACK/NAK to binary bit values
36.212 0029 Correction to bit collection, selection and transmission
36.212 0030 Padding one bit to DCI format 1 when format 1 and format 0/1A have the same size
36.212 0031 Modification of M_limit
36.212 0032 Definition of Formats 2 and 2A
36.212 0033 rev 2 Corrections to DCI formats
36.212 0035 rev 1 Format 1B confirmation flag
36.212 0036 Corrections to Rank information scrambling in Uplink Shared Channel
36.212 0037 rev 2 Clarification of TPC commands signaled in DCI formats 3/3A
36.212 0038 Clarification on UE transmit antenna selection mask
36.212 0039 rev 1 Linking of control resources in PUSCH to data MCS
36.212 0041 Definition of Bit Mapping for DCI signalling
36.212 0042 rev 1 Clarification on resource allocation in DCI format 1/2/2A
36.212 0043 DCI Format 1A changes needed for scheduling Broadcast Control
36.212 0044 DCI format1C 
36.212 0045 Miscellaneous corrections
36.212 0046 Correction on downlink multi-user MIMO
36.212 0046 rev 1 Correction on downlink multi-user MIMO
36.212 0047 Corrections to DL DCI Formats In case of Ambiguous Payload Sizes
36.212 0048 for RE provisioning for the control information in case of CQI-only transmission on PUSCH
36.212 0050 rev 2 Clarification of input bits corresponding to 2-bit HARQ-ACK and 2-bit RI
36.212 0053 Editorial corrections to 36.212
36.212 0055 Miscellaneous Corrections
36.212 0057 Clarification of mapping of information bits
36.212 0058 Completion of 36.212 CR47 (R1-083421) for “new” DCI Formats
36.212 0059 Change for determining DCI format 1A TBS table column indicator for broadcast control
36.212 0061 rev 2 Defining DCI format 1A for downlink data arrival
36.212 0063 rev 1 ACK/NACK transmission on PUSCH for LTE TDD
36.212 0065 Correction in 36.212 related to TDD downlink HARQ processes
36.212 0067 rev 1 Correction of control MCS offset and SRS symbol puncturing
36.212 0068 rev 1 DCI format 2/2A
36.212 0069 Correction to zero padding in DCI format 1
36.212 0071 Clarification of RI bit field mapping for PUCCH
36.212 0072 Clarifying RNTI bit mapping for PDCCH CRC scrambling
36.212 0073 Clarification on BCH transport block size
36.212 0076 Clarification on the number of PUCCH-based CQI/PMI bits when reported on PUSCH
36.212 0077 rev 1 Corrections to Transmitted Rank Indication
36.212 0079 rev 1 Correction to the bundled ACK/NACK and DAI transmission 
36.212 0080 rev 2 Corrections to transmission modes
36.212 0081 rev 1 Correction on ACKNACK transmission on PUSCH for LTE TDD
36.212 0082 rev 2 Corrections to CQI and RI fields description
36.212 0083 Clarifying DCI format 1A and DCI Format 1B
36.212 0087 Clarify some parameters for determining control resources on PUSCH
36.212 0088 rev 1 Editorial corrections to 36.212
36.212 0089 Clarification on bitwidth of RI
36.212 0091 rev 2 Coding and multiplexing of multiple ACK/NACK in PUSCH
36.212 0092 rev 1 Clarification on channel coding for UCI HARQ-ACK
36.212 0094 Correction to Channel interleaver for PUSCH RE Mapping
36.212 0098 Correction to TBS determination for DCI format 1C
36.212 0101 Correction on UE behavior upon receiving DCI format 1B
36.212 0113 Clarification on PMI indication in DCI format1B and format 2
36.212 0119 rev 1 Corrections on transport block processing for UL-SCH
36.212 0123 rev 1 Corrections on ^^
36.212 0125 Minor Correction on DCI Format 1 Description
36.212 0126 Correction on ACK/NACK mapping
36.212 0127 Correction on ACK/NACK mapping
36.212 0133 rev 1 Correction of two HARQ-ACK feedback on PUSCH
36.212 0156
36.212 0159
36.212 0160
36.212 0187
36.212 0188
36.212 0189
36.213 0001 rev 2 Update of 36.213
36.213 0002 Update of TS36.213 according to changes listed in cover sheet
36.213 0003 rev 1 PUCCH timing and other formatting and typo corrections
36.213 0006 rev 1 PUCCH power control for non-unicast information
36.213 0008 UE ACK/NACK Procedure
36.213 0009 UL ACK/NACK timing for TDD
36.213 0010 Specification of UL control channel assignment
36.213 0011 Precoding Matrix for 2Tx Open-loop SM
36.213 0012 Clarifications on UE selected CQI reports
36.213 0013 rev 1 UL HARQ Operation and Timing
36.213 0014 SRS Power Control
36.213 0015 rev 1 Correction of UE PUSCH frequency hopping procedure
36.213 0017 rev 4 Blind PDCCH decoding
36.213 0019 rev 1 Clarification of Tx Mode vs DCI format
36.213 0020 Resource allocation for distributed VRB
36.213 0021 rev 2 Power Headroom
36.213 0022 Clarification for RI reporting in PUCCH and PUSCH reporting modes
36.213 0025 Correction of the description of PUSCH power control for TDD
36.213 0026 UL ACK/NACK procedure for TDD
36.213 0027 Indication of radio problem detection
36.213 0028 Definition of Relative Narrowband TX Power Indicator
36.213 0029 Calculation of ΔTF(i) for UL-PC
36.213 0030 CQI reference and set S definition, CQI mode removal, and Miscellanious
36.213 0031 Modulation order and TBS determination for PDSCH and PUSCH
36.213 0032 On Sounding RS
36.213 0033 Multiplexing of rank and CQI/PMI reports on PUCCH
36.213 0034 Timing advance command responding time
36.213 0037 rev 2 SRS hopping pattern for closed loop antenna selection
36.213 0039 rev 2 Clarification on uplink power control
36.213 0041 Clarification on DCI formats using resource allocation type 2
36.213 0043 rev 2 Clarification on tree structure of CCE aggregations
36.213 0046 rev 2 Correction of the description of PUCCH power control for TDD
36.213 0047 rev 1 Removal of CR0009
36.213 0048 rev 1 Correction of mapping of cyclic shift value to PHICH modifier
36.213 0049 TBS disabling for DCI formats 2 and 2A
36.213 0050 Correction of maximum TBS sizes
36.213 0051 Completion of the table specifying the number of bits for the periodic feedback
36.213 0054 Clarification of RNTI for PUSCH/PUCCH power control with DCI formats 3/3A
36.213 0055 rev 1 Clarification on mapping of Differential CQI fields
36.213 0059 rev 1 PUSCH Power Control
36.213 0060 RB restriction and modulation order for CQI-only transmission on PUSCH
36.213 0061 Modulation order determination for uplink retransmissions
36.213 0062 rev 2 Introducing missing L1 parameters into 36.213
36.213 0063 rev 2 Correcting the range and representation of delta_TF_PUCCH
36.213 0064 rev 1 Adjusting TBS sizes to for VoIP
36.213 0067 Correction to the downlink resource allocation
36.213 0068 Removal of special handling for PUSCH mapping in PUCCH region
36.213 0069 Correction to the formulas for uplink power control
36.213 0070 rev 1 Definition of Bit Mapping for DCI Signalling
36.213 0071 Clarification on PUSCH TPC commands
36.213 0072 rev 1 Reference for CQI/PMI Reporting Offset
36.213 0074 Correction to the downlink/uplink timing
36.213 0075 Correction to the time alignment command
36.213 0077 rev 1 Correction of offset signalling of UL Control information MCS
36.213 0078 rev 2 DCI format1C 
36.213 0080 Correction to Precoder Cycling for Open-loop Spatial Multiplexing
36.213 0081 rev 1 Clarifying Periodic CQI Reporting using PUCCH
36.213 0082 rev 3 Corrections to RI for CQI reporting
36.213 0083 rev 2 Moving description of large delay CDD to 36.211
36.213 0084 rev 1 CQI reference measurement period
36.213 0085 rev 5 CQI report for transmission mode 7
36.213 0086 Correction on downlink multi-user MIMO
36.213 0087 PUCCH Reporting
36.213 0088 rev 1 Handling of Uplink Grant in Random Access Response
36.213 0089 Correction to UL Hopping operation
36.213 0090 DRS EPRE
36.213 0092 Uplink ACK/NACK mapping for TDD
36.213 0093 UL SRI Parameters Configuration
36.213 0094 Miscellaneous updates for 36.213
36.213 0095 Clarifying Requirement for Max PDSCH Coding Rate
36.213 0096 UE Specific SRS Configuration
36.213 0097 DCI Format 1A changes needed for scheduling Broadcast Control
36.213 0098 Processing of TPC bits in the random access response
36.213 0100 rev 1 Support of multi-bit ACK/NAK transmission in TDD
36.213 0102 rev 3 Reception of DCI formats
36.213 0105 rev 8 Alignment of RAN1/RAN2 specification
36.213 0107 rev 1 General correction of reset of power control and random access response message
36.213 0108 rev 2 Final details on codebook subset restrictions
36.213 0108 rev 3 Final details on codebook subset restrictions
36.213 0109 Correction on the definition of Pmax
36.213 0112 rev 2 CQI/PMI reference measurement periods
36.213 0113 Correction of introduction of shortened SR
36.213 0114 RAN1/2 specification alignment on HARQ operation
36.213 0115 Introducing other missing L1 parameters in 36.213
36.213 0116 PDCCH blind decoding
36.213 0117 PDCCH search space
36.213 0119 Delta_TF for PUSCH
36.213 0120 Delta_preamble_msg3 parameter values and TPC command in RA response
36.213 0122 rev 1 Correction of offset signaling of uplink control information MCS
36.213 0124 Miscellaneous Corrections
36.213 0125 Clarification of the uplink index in TDD mode
36.213 0126 Clarification of the uplink transmission configurations
36.213 0127 rev 2 Correction to the PHICH index assignment
36.213 0128 Clarification of type-2 PDSCH resource allocation for format 1C
36.213 0129 Clarification of uplink grant in random access response
36.213 0130 UE sounding procedure
36.213 0132 Switching between DCI 1A and 2
36.213 0134 Change for determining DCI format 1A TBS table column indicator for broadcast control
36.213 0135 Clarifying UL VRB Allocation
36.213 0136 rev 1 Correction for Aperiodic CQI
36.213 0137 rev 1 Correction for Aperiodic CQI Reporting
36.213 0138 rev 1 Correction to PUCCH CQI reporting mode for N^DL_RB <= 7
36.213 0140 rev 1 On sounding procedure in TDD
36.213 0141 rev 1 Alignment of RAN1/RAN3 specification
36.213 0143 rev 1 TTI bundling
36.213 0144 rev 1 ACK/NACK transmission on PUSCH for LTE TDD
36.213 0145 rev 1 Timing relationship between PHICH and its associated PUSCH
36.213 0147 rev 1 Definition of parameter for downlink reference signal transmit power
36.213 0148 rev 1 Radio link monitoring
36.213 0149 rev 1 Correction in 36.213 related to TDD downlink HARQ processes
36.213 0151 Nominal PDSCH-to-RS EPRE Offset for CQI Reporting
36.213 0152 rev 1 Support of UL ACK/NAK repetition in Rel-8
36.213 0154 rev 1 Corrections on codebook subset restriction for open-loop spatial multiplexing
36.213 0155 Clarification of misconfiguration of aperiodic CQI and SR
36.213 0156 rev 1 Correction of control information multiplexing in subframe bundling mode
36.213 0157 Correction to the PHICH index assignment
36.213 0158 rev 1 UE transmit antenna selection
36.213 0159 Clarification of spatial different CQI for CQI reporting Mode 2-1
36.213 0160 rev 1 Corrections for TDD ACK/NACK bundling and multiplexing
36.213 0161 Correction to RI for Open-Loop Spatial Multiplexing
36.213 0162 Correction of differential CQI
36.213 0163 Inconsistency between PMI definition and codebook index
36.213 0164 PDCCH validation for semi-persistent scheduling
36.213 0165 rev 1 Correction to the UE behavior of PUCCH CQI piggybacked on PUSCH
36.213 0166 Correction on SRS procedure when shortened PUCCH format is used
36.213 0167 rev 1 Transmission overlapping of physical channels/signals with PDSCH for transmission mode 7
36.213 0168 rev 1 Clarification on path loss definition
36.213 0169 Clarification of SRS and SR transmission
36.213 0171 Clarification on UE behavior when skipping decoding
36.213 0172 rev 1 PUSCH Hopping operation corrections
36.213 0173 Clarification on message 3 transmission timing
36.213 0174 MCS handling for DwPTS
36.213 0175 Clarification of UE-specific time domain position for SR transmission
36.213 0176 rev 1 Physical layer parameters for CQI reporting
36.213 0177 A-periodic CQI clarification for TDD UL/DL configuration 0
36.213 0179 rev 1 Correction to the definitions of rho_A and rho_B (downlink power allocation)
36.213 0180 Clarification of uplink A/N resource indication
36.213 0181 PDCCH format 0 for message 3 adaptive retransmission and transmission of control information in message 3 during contention based random access procedure
36.213 0182 To Fix the Discrepancy of Uplink Power Control and Channel Coding of Control Information in PUSCH
36.213 0183 CQI reporting for antenna port 5
36.213 0183 rev 1 CQI reporting for antenna port 5
36.213 0184 rev 1 Corrections to Transmitted Rank Indication
36.213 0185 rev 4 Corrections to transmission modes
36.213 0186 rev 2 Delta_TF configuration for control only PUSCH
36.213 0187 rev 1 Correction to concurrent SRS and ACK/NACK transmission
36.213 0191 rev 1 PDCCH release for semi-persistent scheduling
36.213 0192 rev 1 Correction on ACKNACK transmission on PUSCH for LTE TDD
36.213 0193 Correction to subband differential CQI value to offset level mapping for aperiodic CQI reporting
36.213 0194 Correction for DRS Collision handling
36.213 0196 rev 2 Alignment of RAN1/RAN4 specification on UE maximum output power
36.213 0197 Transmission scheme for transmission mode 7 with SPS C-RNTI
36.213 0198 Clarifying bandwidth parts for periodic CQI reporting and CQI refererence period
36.213 0199 rev 2 Correction to the ACK/NACK bundling in case of transmission mode 3 and 4
36.213 0200 ACK/NAK repetition for TDD ACK/NAK multiplexing
36.213 0201 Clarifying UL ACK/NAK transmission in TDD
36.213 0202 Corrections to UE Transmit Antenna Selection
36.213 0203 Correction to UE PUSCH hopping procedure
36.213 0204 Correction to PHICH resource association in TTI bundling
36.213 0205 Clarification of the length of resource assignment
36.213 0206 Correction on ACK/NACK transmission for downlink SPS resource release
36.213 0207 Introduction of additional values of wideband CQI/PMI periodicities
36.213 0208 rev 2 Correction to CQI/PMI/RI reporting field
36.213 0209 rev 2 Correction to rho_A definition for CQI calculation
36.213 0210 Correction to erroneous cases in PUSCH linear block codes
36.213 0211 rev 1 Removing RL monitoring start and stop
36.213 0214 rev 1 Correction to type-1 and type-2 PUSCH hopping
36.213 0215 Contradicting statements on determination of CQI subband size
36.213 0216 Corrections to SRS
36.213 0219 rev 2 Miscellaneous corrections on TDD ACKNACK
36.213 0221 rev 1 for Redundancy Version mapping function for DCI 1C
36.213 0223 Scrambling of PUSCH corresponding to Random Access Response Grant
36.213 0225 Removal of SRS with message 3
36.213 0226 rev 3 PRACH retransmission timing
36.213 0227 Clarifying error handling of PDSCH and PUSCH assignments
36.213 0228 Clarify PHICH index mapping
36.213 0229 Correction of CQI timing
36.213 0230 Alignment of CQI parameter names with RRC
36.213 0231 rev 1 Removal of ‘Off’ values for periodic reporting in L1
36.213 0232 Default value of RI
36.213 0233 rev 1 Clarification of uplink timing adjustments
36.213 0234 Clarification on ACK/NAK repetition
36.213 0235 rev 1 Correction to the condition of resetting accumulated uplink power correction
36.213 0236 Correction to the random access channel parameters received from higher layer
36.213 0237 Correction on TDD ACKNACK
36.213 0238 rev 1 Correction on CQI reporting
36.213 0239 Correction on the HARQ process number
36.213 0241 rev 1 correction of the description on TTI-bundling
36.213 0242 rev 1 Clarify latest and initial PDCCH for PDSCH and PUSCH transmisisons, and NDI for SPS activation
36.213 0243 Clarify DRS EPRE
36.213 0244 rev 1 Clarification on TPC commands for SPS
36.213 0245 rev 1 Correction to PUSCH hopping and PHICH mapping procedures
36.213 0246 Clarification on subband indexing in periodic CQI reporting
36.213 0247 rev 2 Correction to DVRB operation in TDD transmission mode 7
36.213 0249 Clarification of concurrent ACKNACK and periodic PMI/RI transmission on PUCCH for TDD
36.213 0250 Clarify Inter-cell synchronization text
36.213 0255 rev 5 Editorial corrections to 36.213
36.213 0257 rev 1 Add shorter SR periodicity
36.213 0265 Clarification for TDD when multiplexing ACK/NACK with SR of ACK/NACK with CQI/PMI or RI
36.213 0294 ACK/NACK and CQI simultaneous transmission in ACK/NACK bundling in TDD
36.213 0305 rev 1 Correction on UE behaviour upon reporting periodic CSI using PUCCH Mode1-1
36.213 0306 Clarification for the definition of CQI
36.213 0307 Clarification for the definition of Precoding Matrix Indicator
36.213 0324 rev 3 Accumulation of power control commands from DCI format 3/3A
36.213 0376 rev 1 RNTI Configuration associated with DL Resource Allocation Type 2
36.213 0394 Correction of reference signal scrambling sequence initialization for SPS in transmission mode 7
36.213 0395 Correction of reference signal scrambling sequence initialization for SPS in transmission mode 7
36.213 0397 Correction on UE procedure for reporting HARQ-ACK
36.213 0398 Correction on UE procedure for reporting HARQ-ACK
36.213 0417 Correction to PUSCH/PUCCH transmit power after PRACH power ramping
36.213 0417 rev 1 Correction to PUSCH/PUCCH transmit power after PRACH power ramping
36.213 0433 Correction to QCL behaviour on CRS
36.213 0434 Correction on PUCCH power control
36.213 0441
36.213 0446
36.213 0447
36.213 0456
36.213 0456 rev 1
36.213 0456 rev 2
36.213 0459 rev 1
36.213 0460
36.213 0461
36.213 0462
36.213 0462 rev 1
36.213 0471
36.213 0493
36.213 0493 rev 1
36.213 0493 rev 2
36.213 0501
36.213 0502
36.213 0529
36.213 0532
36.213 1148
36.213 1149
36.214 0001 rev 1 RRC state correction for LTE UE measurements
36.214 0003 rev 1 Inclusion of agreements from RAN1#51bis and RAN1#52
36.214 0004 Introduction of eNode B Measurement of Received Interference Power
36.214 0005 Introduction of eNode B Measurement of Thermal Noise Power
36.214 0006 Modification to the RSRP definition
36.214 0007 Modification of RSRQ and removal of RSSI
36.214 0008 RSRQ Measurement Definition
36.214 0009 RSRP and RSRQ Definitions with Receiver Diversity
36.214 0010 Clarification on reference point of RSRP and RSRQ for EUTRA
36.214 0012 rev 1 Modification of RSRQ definition
36.214 0019 Correcting inconsistency between inter-RAT UTRA measurements and requirements
36.214 0019 rev 1 Correcting inconsistency between inter-RAT UTRA measurements and requirements
36.300 0356 Correction on physical layer part on TS36.300
36.300 0566 Correction on physical layer part on TS36.300
36.306 0032 Correction on the definition of ue-SpecificRefSigsSupported
36.306 0033 Correction on the definition of ue-SpecificRefSigsSupported

page generated from database: 2024-11-12 10:16:04

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links