3GPP Work Item mapping to Change Requests
3GPP Work Item = 20007 (EDCH-IurIub)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
Spec | CR number and Revision | CR Title |
---|---|---|
25.401 | 0094 | Introduction of E-DCH in 25.401 |
25.401 | 0094 rev 1 | Introduction of E-DCH in 25.401 |
25.401 | 0101 | E-DCH Protocol Model |
25.413 | 0742 | Addition of E-DCH MAC-d Flow ID in transparent Container |
25.413 | 0742 rev 1 | Addition of E-DCH MAC-d Flow ID in transparent Container |
25.413 | 0789 | HARQ Info addition For E-DCH |
25.420 | 0045 | Introduction of E-DCH |
25.420 | 0045 rev 1 | Introduction of E-DCH |
25.420 | 0045 rev 2 | Introduction of E-DCH |
25.423 | 1007 | Changes for Introducing EDCH |
25.423 | 1007 rev 1 | Changes for Introducing EDCH |
25.423 | 1007 rev 2 | Changes for Introducing EDCH |
25.423 | 1030 | EDCH Clean up |
25.423 | 1034 | Correction of RNSAP E-DCH IEs |
25.423 | 1034 rev 1 | Correction of RNSAP E-DCH IEs |
25.423 | 1039 | EDCH RNSAP ASN.1 |
25.423 | 1055 | Maximum UE Tx Power |
25.423 | 1060 | E-DCH general corrections and improvements |
25.423 | 1060 rev 1 | E-DCH general corrections and improvements |
25.423 | 1061 | E-DCH TFCS |
25.423 | 1076 | Correction on E-RGCH Sequence Signature |
25.423 | 1076 rev 1 | Correction on E-RGCH Sequence Signature |
25.423 | 1077 | Introduction of Bundling Feature |
25.423 | 1077 rev 1 | Introduction of Bundling Feature |
25.423 | 1078 | Alignment of RNSAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331) |
25.423 | 1078 rev 1 | Alignment of RNSAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331) |
25.423 | 1082 | RNSAP stage 3 alignment with current status |
25.423 | 1082 rev 1 | RNSAP stage 3 alignment with current status |
25.423 | 1082 rev 2 | RNSAP stage 3 alignment with current status |
25.423 | 1082 rev 3 | RNSAP stage 3 alignment with current status |
25.423 | 1083 | Correction related to of E-DCH IEs |
25.423 | 1084 | EDCH capability in neighboring cells |
25.423 | 1088 | Support Indicator for E-DCH |
25.423 | 1089 | General correction and improvement |
25.423 | 1092 | E-DCH Information elements editorial cleanup |
25.423 | 1093 | E-DCH Logical Channel ID |
25.423 | 1094 | E-DCH RL handling clarifications |
25.423 | 1095 | E-DCH miscellaneous corrections |
25.423 | 1096 | Maximum UE TX Power for E-DCH |
25.423 | 1096 rev 1 | Maximum UE TX Power for E-DCH |
25.423 | 1097 | EDCH cleanup |
25.423 | 1098 | Reconfiguration of E-RGCH/HICH at serving cell change |
25.423 | 1099 | HARQ Info addition For E-DCH |
25.423 | 1100 | Clarification for the DRNS behavior at E-DCH serving cell change |
25.423 | 1102 | EDCH Corrections and Improvements |
25.423 | 1103 | E-DCH HARQ RV Configuration |
25.423 | 1103 rev 1 | E-DCH HARQ RV Configuration |
25.423 | 1104 | FDD Downlink Unidirectional DCH Indicator |
25.423 | 1105 | FDD Unidirectional DCH Indicator reconfiguration |
25.423 | 1105 rev 1 | FDD Unidirectional DCH Indicator reconfiguration |
25.423 | 1105 rev 2 | FDD Unidirectional DCH Indicator reconfiguration |
25.423 | 1105 rev 3 | FDD Unidirectional DCH Indicator reconfiguration |
25.423 | 1107 | HARQ Process Management for E-DCH |
25.423 | 1107 rev 1 | HARQ Process Management for E-DCH |
25.423 | 1107 rev 2 | HARQ Process Management for E-DCH |
25.423 | 1107 rev 3 | HARQ Process Management for E-DCH |
25.423 | 1107 rev 4 | HARQ Process Management for E-DCH |
25.423 | 1108 | E-DCH processing issue and rate limitation |
25.423 | 1108 rev 1 | E-DCH processing issue and rate limitation |
25.423 | 1108 rev 2 | E-DCH processing issue and rate limitation |
25.423 | 1110 | HSPA Serving Cell Change by RL Addition Procedure |
25.423 | 1111 | Alignment of RNSAP with latest HSUPA agreements |
25.423 | 1111 rev 1 | Alignment of RNSAP with latest HSUPA agreements |
25.423 | 1111 rev 2 | Alignment of RNSAP with latest HSUPA agreements |
25.423 | 1111 rev 3 | Alignment of RNSAP with latest HSUPA agreements |
25.423 | 1112 | Correction on E-DCH MAC-Flow to Add IE |
25.423 | 1112 rev 1 | Correction on E-DCH MAC-Flow to Add IE |
25.423 | 1116 | EDCH HARQ IR Combining Support Indicator |
25.423 | 1116 rev 1 | EDCH HARQ IR Combining Support Indicator |
25.423 | 1122 | HARQ process management for EDCH |
25.423 | 1123 | EDCH Cell Capability Enhancement |
25.423 | 1123 rev 1 | EDCH Cell Capability Enhancement |
25.423 | 1124 | E-DCH HARQ Combining Capability |
25.423 | 1124 rev 1 | E-DCH HARQ Combining Capability |
25.423 | 1125 | E-DCH HARQ RV Configuration |
25.423 | 1125 rev 1 | E-DCH HARQ RV Configuration |
25.423 | 1133 | E-DCH Mac-D PDU Size List Alignment |
25.423 | 1133 rev 1 | E-DCH Mac-D PDU Size List Alignment |
25.423 | 1134 | Non serving HSDPA indicator for E-DCH |
25.423 | 1134 rev 1 | Non serving HSDPA indicator for E-DCH |
25.423 | 1134 rev 2 | Non serving HSDPA indicator for E-DCH |
25.423 | 1136 | Clarification on serving EDCH cell change |
25.423 | 1137 | Correction on the decoding of EDCH |
25.423 | 1139 | Error Correction Radio Link Parameter Update |
25.423 | 1141 | E-DCH Maximum Rate Indication |
25.423 | 1142 | Alignment of E-DCH RL Set ID |
25.423 | 1144 | EDCH rate limitation issue when processing overload |
25.423 | 1146 | Correction of criticality for Unirectional DCH Indictor |
25.423 | 1147 | HARQ Failure Indication due to MAC-e Reset in UE |
25.423 | 1147 rev 1 | HARQ Failure Indication due to MAC-e Reset in UE |
25.423 | 1149 | General Corrections and Improvements for E-DCH |
25.423 | 1152 | Introduction of E-DCH Reference Power Offset |
25.423 | 1152 rev 1 | Introduction of E-DCH Reference Power Offset |
25.423 | 1152 rev 2 | Introduction of E-DCH Reference Power Offset |
25.423 | 1161 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.423 | 1161 rev 1 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.423 | 1161 rev 2 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.423 | 1162 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.423 | 1162 rev 1 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.423 | 1162 rev 2 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.423 | 1163 | Loss of HS-DSCH configured indicator IE in Radio Link Addition |
25.423 | 1164 | Loss of HS-DSCH configured indicator IE in Radio Link Addition |
25.423 | 1165 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.423 | 1165 rev 1 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.423 | 1166 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.423 | 1166 rev 1 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.423 | 1167 | Handling at Inter-Node B E-DCH Serving Cell Change |
25.423 | 1168 | Handling at Inter-Node B E-DCH Serving Cell Change |
25.423 | 1169 | Correction of the common related information for E-HICH and E-RGCH |
25.423 | 1169 rev 1 | Correction of the common related information for E-HICH and E-RGCH |
25.423 | 1170 | Correction of the common related information for E-HICH and E-RGCH |
25.423 | 1170 rev 1 | Correction of the common related information for E-HICH and E-RGCH |
25.423 | 1171 | E-RGCH/E-HICH Power Offset value range |
25.423 | 1172 | E-RGCH/E-HICH Power Offset value range |
25.423 | 1179 | E-DCH and HS-DSCH same serving cell |
25.423 | 1179 rev 1 | E-DCH and HS-DSCH same serving cell |
25.423 | 1179 rev 2 | E-DCH and HS-DSCH same serving cell |
25.423 | 1180 | E-DCH and HS-DSCH same serving cell |
25.423 | 1180 rev 1 | E-DCH and HS-DSCH same serving cell |
25.423 | 1180 rev 2 | E-DCH and HS-DSCH same serving cell |
25.423 | 1181 | HS-DSCH Configured Indicator for Radio Link Addition |
25.423 | 1181 rev 1 | HS-DSCH Configured Indicator for Radio Link Addition |
25.423 | 1182 | HS-DSCH Configured Indicator for Radio Link Addition |
25.423 | 1182 rev 1 | HS-DSCH Configured Indicator for Radio Link Addition |
25.423 | 1183 | E-RNTI allocation on serving change |
25.423 | 1183 rev 1 | E-RNTI allocation on serving change |
25.423 | 1184 | E-RNTI allocation on serving change |
25.423 | 1184 rev 1 | E-RNTI allocation on serving change |
25.423 | 1185 | E-RGCH index steps threshold improvement |
25.423 | 1188 | RNL cause E-DCH not supported missing in the ASN.1 |
25.423 | 1189 | RNL cause E-DCH not supported missing in the ASN.1 |
25.423 | 1191 | Power Offset for E-DCH control-only transmissions |
25.423 | 1191 rev 1 | Power Offset for E-DCH control-only transmissions |
25.423 | 1192 | Power Offset for E-DCH control-only transmissions |
25.423 | 1192 rev 1 | Power Offset for E-DCH control-only transmissions |
25.423 | 1192 rev 2 | Power Offset for E-DCH control-only transmissions |
25.423 | 1193 | Missing Presence attribute for the Serving E-DCH RL IE in the RADIO LINK SETUP REQUEST FDD message |
25.423 | 1194 | Missing Presence attribute for the Serving E-DCH RL IE in the RADIO LINK SETUP REQUEST FDD message |
25.423 | 1195 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.423 | 1195 rev 1 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.423 | 1196 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.423 | 1196 rev 1 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.423 | 1197 | E-AGCH/E-RGCH/E-HICH Code Change Indicator |
25.423 | 1198 | E-AGCH/E-RGCH/E-HICH Code Change Indicator |
25.423 | 1199 | Addition of QE to E-DCH FP |
25.423 | 1200 | Addition of QE to E-DCH FP |
25.423 | 1202 | Correction on the value range of E-DCH IEs |
25.423 | 1202 rev 1 | Correction on the value range of E-DCH IEs |
25.423 | 1203 | Correction on the value range of E-DCH IEs |
25.423 | 1203 rev 1 | Correction on the value range of E-DCH IEs |
25.423 | 1204 | Presence of E-DCH FDD Information Response IE |
25.423 | 1204 rev 1 | Presence of E-DCH FDD Information Response IE |
25.423 | 1205 | Presence of E-DCH FDD Information Response IE |
25.423 | 1205 rev 1 | Presence of E-DCH FDD Information Response IE |
25.423 | 1208 rev 1 | DCH combined when EDCH operation |
25.423 | 1209 rev 1 | DCH combined when EDCH operation |
25.423 | 1210 | Correction of maxNrOfMACdFlows for EDCH in ASN.1 |
25.423 | 1211 | Correction of maxNrOfMACdFlows for EDCH in ASN.1 |
25.423 | 1212 | Use of the RL Specific E-DCH Information IE for E-DCH modification |
25.423 | 1213 | Use of the RL Specific E-DCH Information IE for E-DCH modification |
25.423 | 1214 | Optional usage of the E-DCH Reference Power Offset IE |
25.423 | 1214 rev 1 | Optional usage of the E-DCH Reference Power Offset IE |
25.423 | 1215 | Optional usage of the E-DCH Reference Power Offset IE |
25.423 | 1215 rev 1 | Optional usage of the E-DCH Reference Power Offset IE |
25.423 | 1216 | MAC-HS reset Indicator alignment for the Radio Link Addition Response |
25.423 | 1216 rev 1 | MAC-HS reset Indicator alignment for the Radio Link Addition Response |
25.423 | 1217 | MAC-HS reset Indicator alignment for the Radio Link Addition Response |
25.423 | 1217 rev 1 | MAC-HS reset Indicator alignment for the Radio Link Addition Response |
25.423 | 1220 | E-DCH not optional in RNSAP message RL SETUP RESPONSE |
25.423 | 1220 rev 1 | E-DCH not optional in RNSAP message RL SETUP RESPONSE |
25.423 | 1221 | E-DCH not optional in RNSAP message RL SETUP RESPONSE |
25.423 | 1221 rev 1 | E-DCH not optional in RNSAP message RL SETUP RESPONSE |
25.423 | 1224 | Correction for Synchronised RL Reconfiguration |
25.423 | 1225 | Correction for Synchronised RL Reconfiguration |
25.423 | 1228 | Further Abnormal Conditions for E-DCH |
25.423 | 1229 | Further Abnormal Conditions for E-DCH |
25.423 | 1231 | Correction for RL Reconfiguration |
25.423 | 1231 rev 1 | Correction for RL Reconfiguration |
25.423 | 1232 | Correction for RL Reconfiguration |
25.423 | 1232 rev 1 | Correction for RL Reconfiguration |
25.423 | 1233 | Correction on the value range of E-DCH Ies |
25.423 | 1233 rev 1 | Correction on the value range of E-DCH Ies |
25.423 | 1234 | Correction on the value range of E-DCH Ies |
25.423 | 1234 rev 1 | Correction on the value range of E-DCH Ies |
25.423 | 1235 | Misalignment of “E-DCH MAC-d Flow Specific Information Response” IE between tabular and ASN.1 |
25.423 | 1236 | Misalignment of “E-DCH MAC-d Flow Specific Information Response” IE between tabular and ASN.1 |
25.423 | 1242 | Correction for Misalignment between Tabular and ASN.1 for E-RGCH and E-HICH Channelisation Code IE |
25.423 | 1242 rev 1 | Correction for Misalignment between Tabular and ASN.1 for E-RGCH and E-HICH Channelisation Code IE |
25.423 | 1242 rev 2 | Correction for Misalignment between Tabular and ASN.1 for E-RGCH and E-HICH Channelisation Code IE |
25.423 | 1243 | Correction for Misalignment between Tabular and ASN.1 for E-RGCH and E-HICH Channelisation Code IE |
25.423 | 1243 rev 1 | Correction for Misalignment between Tabular and ASN.1 for E-RGCH and E-HICH Channelisation Code IE |
25.423 | 1243 rev 2 | Correction for Misalignment between Tabular and ASN.1 for E-RGCH and E-HICH Channelisation Code IE |
25.423 | 1244 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1244 rev 1 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1244 rev 2 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1244 rev 3 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1245 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1245 rev 1 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1245 rev 2 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1245 rev 3 | Correction for Misalignment between Tabular and ASN.1 for E-DCH Minimum Set E-TFCI IE |
25.423 | 1246 | Correction for the max repetition of RL Information Response IE in tabular |
25.423 | 1246 rev 1 | Correction for the max repetition of RL Information Response IE in tabular |
25.423 | 1247 | Correction for the max repetition of RL Information Response IE in tabular |
25.423 | 1247 rev 1 | Correction for the max repetition of RL Information Response IE in tabular |
25.423 | 1248 | Correction for the minimum repetition of Mandatory IE in ASN.1 |
25.423 | 1249 | Correction for the minimum repetition of Mandatory IE in ASN.1 |
25.423 | 1252 | Correction to an abnormal case in E-DCH RL ADDITION |
25.423 | 1253 | Correction to an abnormal case in E-DCH RL ADDITION |
25.423 | 1264 | Correction of the Maximum number of logical channel ID |
25.423 | 1265 | Correction of the Maximum number of logical channel ID |
25.423 | 1265 rev 1 | Correction of the Maximum number of logical channel ID |
25.423 | 1277 | Introducing a new value E-DCH TTI2ms not supported in the Cause IE |
25.423 | 1278 | Introduced some values in the Cause IE for optional E-DCH minimum Spreading Factor operation |
25.423 | 1279 | Introduced two values in the Cause IE for optional E-DCH HARQ Combining operation |
25.423 | 1286 | Correction of wrong description for E-DCH HARQ process allocation for 2ms TT |
25.423 | 1287 | Correction of wrong description for E-DCH HARQ process allocation for 2ms TT |
25.423 | 1370 rev 1 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.423 | 1370 rev 2 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.423 | 1371 rev 1 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.423 | 1371 rev 2 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.425 | 0099 | Transport Network CongestionDetection and Control |
25.426 | 0050 | Adding of E-DCH in 25.426 |
25.426 | 0051 | Adding of E-DCH in 25.426 |
25.427 | 0095 | Changes on 25.427 due to the introduction of Enhanced Uplink |
25.427 | 0095 rev 1 | Changes on 25.427 due to the introduction of Enhanced Uplink |
25.427 | 0095 rev 2 | Changes on 25.427 due to the introduction of Enhanced Uplink |
25.427 | 0098 | Transport Network Congestion Detection and Control |
25.427 | 0099 | EDCH Frame format update |
25.427 | 0099 rev 1 | EDCH Frame format update |
25.427 | 0099 rev 2 | E-DCH Frame format update |
25.427 | 0100 | HARQ failure indication |
25.427 | 0100 rev 1 | HARQ failure indication |
25.427 | 0101 | Transport network congestion detection and control |
25.427 | 0102 | E-DCH Frame format update |
25.427 | 0102 rev 1 | E-DCH Frame format update |
25.427 | 0104 | Support for HARQ Retransmission and Failure Indication |
25.427 | 0104 rev 1 | Support for HARQ Retransmission and Failure Indication |
25.427 | 0105 | Clarification of the use of CFN for Enhanced Uplink |
25.427 | 0106 | Removing the abbreviation SFN for Subframe Number |
25.427 | 0109 | Transport Network CongestionDetection and Control |
25.427 | 0109 rev 1 | Transport Network CongestionDetection and Control |
25.427 | 0110 | CRC-11 Polynomial for E-DCH |
25.427 | 0110 rev 1 | CRC-11 Polynomial for E-DCH |
25.427 | 0113 | Editorial Corrections |
25.427 | 0114 | Header CRC polynomial definition missing for E-DCH |
25.427 | 0115 | Value range missing for Number of Subframes and Number of Mac-es PDUs fields |
25.427 | 0115 rev 1 | Value range missing for Number of Subframes and Number of Mac-es PDUs fields |
25.427 | 0116 | Transport Network Congestion Control Indication |
25.427 | 0117 | Maximum UE Tx Power |
25.427 | 0118 | Maximum UE Tx Power for EDCH |
25.427 | 0118 rev 1 | Maximum UE Tx Power for EDCH |
25.427 | 0118 rev 2 | Maximum UE Tx Power for EDCH |
25.427 | 0118 rev 3 | Maximum UE Tx Power for EDCH |
25.427 | 0119 | EDCH serving cell change indication |
25.427 | 0120 | Conditions for sending HARQ Failure |
25.427 | 0120 rev 1 | Conditions for sending HARQ Failure |
25.427 | 0121 | HARQ failure shall be sent on highest bearer. |
25.427 | 0121 rev 1 | HARQ failure shall be sent on highest bearer. |
25.427 | 0122 | Correction on HARQ Failure Indication |
25.427 | 0123 | Indication of Node B Overload Situations |
25.427 | 0125 | HARQ Failure Indication due to MAC-e Reset in UE |
25.427 | 0125 rev 1 | HARQ Failure Indication due to MAC-e Reset in UE |
25.427 | 0126 | Clarification for HARQ Failure Indication |
25.427 | 0126 rev 1 | Clarification for HARQ Failure Indication |
25.427 | 0126 rev 2 | Clarification for HARQ Failure Indication |
25.427 | 0128 | Missing new frame protocol services in list of services in clause 4.1 |
25.427 | 0128 rev 1 | Missing new frame protocol services in list of services in clause 4.1 |
25.427 | 0129 | Missing new frame protocol services in list of services in clause 4.1 |
25.427 | 0129 rev 1 | Missing new frame protocol services in list of services in clause 4.1 |
25.427 | 0130 | Addition of QE to E-DCH FP |
25.427 | 0131 | Addition of QE to E-DCH FP |
25.427 | 0136 | No Payload CRC if no Payload |
25.427 | 0136 rev 1 | No Payload CRC if no Payload |
25.427 | 0137 | No Payload CRC if no Payload |
25.427 | 0137 rev 1 | No Payload CRC if no Payload |
25.430 | 0056 | Introduction of E-DCH in TS 25.430 |
25.430 | 0056 rev 1 | Introduction of E-DCH in TS 25.430 |
25.430 | 0056 rev 2 | Introduction of E-DCH in TS 25.430 |
25.433 | 1059 rev 1 | for Introduction of E-DCH in NBAP |
25.433 | 1081 | E-DCH NBAP ASN.1 |
25.433 | 1081 rev 1 | E-DCH NBAP ASN.1 |
25.433 | 1081 rev 2 | E-DCH NBAP ASN.1 |
25.433 | 1097 | Maximum UE Tx Power |
25.433 | 1100 | E-DCH general corrections and improvements |
25.433 | 1100 rev 1 | E-DCH general corrections and improvements |
25.433 | 1101 | E-HICH and E-RGCH numbers |
25.433 | 1102 | E-DCH TFCS |
25.433 | 1103 | E-DCH Capacity Consumption Law |
25.433 | 1103 rev 1 | E-DCH Capacity Consumption Law |
25.433 | 1103 rev 2 | E-DCH Capacity Consumption Law |
25.433 | 1104 | E-DCH mobility clarifications |
25.433 | 1105 | E-DCH mobility clarifications |
25.433 | 1106 | E-DCH diversity control |
25.433 | 1106 rev 1 | E-DCH diversity control |
25.433 | 1106 rev 2 | E-DCH diversity control |
25.433 | 1107 | E-DCH: Provided bit-rate per logical channel priority measurement |
25.433 | 1107 rev 1 | E-DCH: Provided bit-rate per logical channel priority measurement |
25.433 | 1107 rev 2 | E-DCH: Provided bit-rate per logical channel priority measurement |
25.433 | 1108 | E-DCH Maximum Received Total Wide Band Power |
25.433 | 1108 rev 1 | E-DCH Maximum Received Total Wide Band Power |
25.433 | 1121 | Correction on E-RGCH Sequence Signature |
25.433 | 1121 rev 1 | Correction on E-RGCH Sequence Signature |
25.433 | 1122 | Introduction of Bundling Feature |
25.433 | 1122 rev 1 | Introduction of Bundling Feature |
25.433 | 1125 | Alignment of NBAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331) |
25.433 | 1125 rev 1 | Alignment of NBAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331) |
25.433 | 1126 | NBAP stage 3 alignment with current status |
25.433 | 1126 rev 1 | NBAP stage 3 alignment with current status |
25.433 | 1126 rev 2 | NBAP stage 3 alignment with current status |
25.433 | 1127 | E-DCH Minimum Set Reference Correction |
25.433 | 1130 | Signalling of Reference Received Total Wideband Power IE |
25.433 | 1130 rev 1 | Signalling of Reference Received Total Wideband Power IE |
25.433 | 1131 | Received E-DCH Power Estimation Reporting |
25.433 | 1132 | Transport Bearer Rearrangement for HSUPA |
25.433 | 1133 | General correction and improvement |
25.433 | 1136 | Non HS transmitted power |
25.433 | 1136 rev 1 | Non HS transmitted power |
25.433 | 1136 rev 2 | Non HS transmitted power |
25.433 | 1137 | E-DCH Information elements editorial cleanup |
25.433 | 1138 | E-DCH Logical Channel ID |
25.433 | 1139 | E-DCH RL handling clarifications |
25.433 | 1140 | E-DCH miscellaneous corrections |
25.433 | 1141 | Maximum UE TX Power for E-DCH |
25.433 | 1141 rev 1 | Maximum UE TX Power for E-DCH |
25.433 | 1145 | Serving to Non-serving power ratio |
25.433 | 1145 rev 1 | Serving to Non-serving power ratio |
25.433 | 1145 rev 2 | Serving to Non-serving power ratio |
25.433 | 1146 | EDCH cleanup |
25.433 | 1147 | Reconfiguration of E-RGCH/HICH at serving cell change |
25.433 | 1150 | Clarification for the Node B behavior at E-DCH serving cell change |
25.433 | 1152 | Non EDCH Load Measurement |
25.433 | 1153 | EDCH Corrections and Improvements |
25.433 | 1154 | E-DCH HARQ RV Configuration |
25.433 | 1154 rev 1 | E-DCH HARQ RV Configuration |
25.433 | 1155 | NBAP clean-up |
25.433 | 1155 rev 1 | NBAP clean-up |
25.433 | 1155 rev 2 | NBAP clean-up |
25.433 | 1155 rev 3 | NBAP clean-up |
25.433 | 1156 | EDCH Cell Capability Enhancement |
25.433 | 1156 rev 1 | EDCH Cell Capability Enhancement |
25.433 | 1156 rev 2 | EDCH Cell Capability Enhancement |
25.433 | 1157 | FDD Downlink Unidirectional DCH Indicator |
25.433 | 1158 | FDD Unidirectional DCH Indicator reconfiguration |
25.433 | 1158 rev 1 | FDD Unidirectional DCH Indicator reconfiguration |
25.433 | 1158 rev 2 | FDD Unidirectional DCH Indicator reconfiguration |
25.433 | 1158 rev 3 | FDD Unidirectional DCH Indicator reconfiguration |
25.433 | 1159 | HARQ Info addition For E-DCH |
25.433 | 1160 | HARQ Process Management for E-DCH |
25.433 | 1160 rev 1 | HARQ Process Management for E-DCH |
25.433 | 1160 rev 2 | HARQ Process Management for E-DCH |
25.433 | 1160 rev 3 | HARQ Process Management for E-DCH |
25.433 | 1160 rev 4 | HARQ Process Management for E-DCH |
25.433 | 1161 | E-DCH processing issue and rate limitation |
25.433 | 1161 rev 1 | E-DCH processing issue and rate limitation |
25.433 | 1161 rev 2 | E-DCH processing issue and rate limitation |
25.433 | 1164 | HSPA Serving Cell Change by RL Addition Procedure |
25.433 | 1165 | Alignment of NBAP with latest HSUPA agreements |
25.433 | 1165 rev 1 | Alignment of NBAP with latest HSUPA agreements |
25.433 | 1165 rev 2 | Alignment of NBAP with latest HSUPA agreements |
25.433 | 1165 rev 3 | Alignment of NBAP with latest HSUPA agreements |
25.433 | 1166 | Abnormal Condition for Maximum Target Received Total Wideband Power |
25.433 | 1166 rev 1 | Abnormal Condition for Maximum Target Received Total Wideband Power |
25.433 | 1167 | HSUPA DL Channel Code Allocation per Cell Portion |
25.433 | 1171 | Introduction of E-DCH Overload Levels |
25.433 | 1172 | EDCH HARQ Combining Capability |
25.433 | 1172 rev 1 | EDCH HARQ Combining Capability |
25.433 | 1173 | Update of EDCH Capacity consumption law |
25.433 | 1173 rev 1 | Update of EDCH Capacity consumption law |
25.433 | 1174 | EDCH setup by unsynchronised reconfiguration |
25.433 | 1174 rev 1 | EDCH setup by unsynchronised reconfiguration |
25.433 | 1176 | HARQ process management for EDCH |
25.433 | 1177 | EDCH Threshold Signalling |
25.433 | 1178 | E-DCH HARQ Combining Capability |
25.433 | 1178 rev 1 | E-DCH HARQ Combining Capability |
25.433 | 1178 rev 2 | E-DCH HARQ Combining Capability |
25.433 | 1179 | E-DCH HARQ RV Configuration |
25.433 | 1179 rev 1 | E-DCH HARQ RV Configuration |
25.433 | 1191 | E-DCH Mac-D PDU Size List Alignment |
25.433 | 1191 rev 1 | E-DCH Mac-D PDU Size List Alignment |
25.433 | 1192 | Non serving HSDPA indicator for E-DCH |
25.433 | 1192 rev 1 | Non serving HSDPA indicator for E-DCH |
25.433 | 1192 rev 2 | Non serving HSDPA indicator for E-DCH |
25.433 | 1193 | Clarification on serving EDCH cell change |
25.433 | 1194 | Correction on the decoding of EDCH |
25.433 | 1196 | Error Correction ASN.1 Radio Link Parameter Update |
25.433 | 1198 | E-DCH Maximum Rate Indication |
25.433 | 1199 | Alignment of E-DCH RL Set ID |
25.433 | 1201 | EDCH rate limitation issue when processing overload |
25.433 | 1205 | Correction of criticality for Unirectional DCH Indictor |
25.433 | 1206 | HARQ Failure Indication due to MAC-e Reset in UE |
25.433 | 1206 rev 1 | HARQ Failure Indication due to MAC-e Reset in UE |
25.433 | 1208 | General Corrections and Improvements for E-DCH |
25.433 | 1211 | Non-serving E-DCH Load Excess Indication |
25.433 | 1211 rev 1 | Non-serving E-DCH Load Excess Indication |
25.433 | 1212 | Introduction of E-DCH Reference Power Offset |
25.433 | 1212 rev 1 | Introduction of E-DCH Reference Power Offset |
25.433 | 1212 rev 2 | Introduction of E-DCH Reference Power Offset |
25.433 | 1225 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.433 | 1225 rev 1 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.433 | 1226 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.433 | 1226 rev 1 | cross-dependencies for E-DCH Reference Power Offset by RL ADDITION |
25.433 | 1227 | Loss of HS-DSCH configured indicator IE in Radio Link Addition |
25.433 | 1228 | Loss of HS-DSCH configured indicator IE in Radio Link Addition |
25.433 | 1229 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.433 | 1229 rev 1 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.433 | 1229 rev 2 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.433 | 1230 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.433 | 1230 rev 1 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.433 | 1230 rev 2 | Corrections to E-DCH Uplink Combination in RL SETUP and RL ADDITION |
25.433 | 1231 | Handling at Inter-Node B E-DCH Serving Cell Change |
25.433 | 1232 | Handling at Inter-Node B E-DCH Serving Cell Change |
25.433 | 1233 | Correction of the common related information for E-HICH and E-RGCH |
25.433 | 1233 rev 1 | Correction of the common related information for E-HICH and E-RGCH |
25.433 | 1234 | Correction of the common related information for E-HICH and E-RGCH |
25.433 | 1234 rev 1 | Correction of the common related information for E-HICH and E-RGCH |
25.433 | 1235 | E-RGCH/E-HICH Power Offset value range |
25.433 | 1236 | E-RGCH/E-HICH Power Offset value range |
25.433 | 1241 | E-DCH and HS-DSCH same serving cell |
25.433 | 1241 rev 1 | E-DCH and HS-DSCH same serving cell |
25.433 | 1241 rev 2 | E-DCH and HS-DSCH same serving cell |
25.433 | 1242 | E-DCH and HS-DSCH same serving cell |
25.433 | 1242 rev 1 | E-DCH and HS-DSCH same serving cell |
25.433 | 1242 rev 2 | E-DCH and HS-DSCH same serving cell |
25.433 | 1243 | HS-DSCH Configured Indicator for Radio Link Addition |
25.433 | 1243 rev 1 | HS-DSCH Configured Indicator for Radio Link Addition |
25.433 | 1244 | HS-DSCH Configured Indicator for Radio Link Addition |
25.433 | 1244 rev 1 | HS-DSCH Configured Indicator for Radio Link Addition |
25.433 | 1245 | E-RNTI allocation on serving change |
25.433 | 1245 rev 1 | E-RNTI allocation on serving change |
25.433 | 1246 | E-RNTI allocation on serving change |
25.433 | 1246 rev 1 | E-RNTI allocation on serving change |
25.433 | 1247 | E-RGCH index steps threshold improvement |
25.433 | 1255 | Power Offset for E-DCH control-only transmissions |
25.433 | 1255 rev 1 | Power Offset for E-DCH control-only transmissions |
25.433 | 1256 | Power Offset for E-DCH control-only transmissions |
25.433 | 1256 rev 1 | Power Offset for E-DCH control-only transmissions |
25.433 | 1256 rev 2 | Power Offset for E-DCH control-only transmissions |
25.433 | 1257 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.433 | 1257 rev 1 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.433 | 1258 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.433 | 1258 rev 1 | Abnormal condition for HS-DSCH Configured Indicator IE |
25.433 | 1259 | Introduction of an E-DCH related Node B measurement for RRM purposes |
25.433 | 1260 | Introduction of a Node B measurement for E-DCH RRM |
25.433 | 1260 rev 1 | Introduction of a Node B measurement for E-DCH RRM |
25.433 | 1260 rev 2 | Introduction of a Node B measurement for E-DCH RRM |
25.433 | 1265 | E-AGCH/E-RGCH/E-HICH Code Change Indicator |
25.433 | 1266 | E-AGCH/E-RGCH/E-HICH Code Change Indicator |
25.433 | 1267 | Addition of QE to E-DCH FP |
25.433 | 1268 | Addition of QE to E-DCH FP |
25.433 | 1272 | Correction of Combined Active Set Update and E-DCH Serving Cell Change with Radio Link Addition Request (Inter Node B Case). |
25.433 | 1273 | Correction of Combined Active Set Update and E-DCH Serving Cell Change with Radio Link Addition Request (Inter Node B Case). |
25.433 | 1274 | Correction on the value range of E-DCH IEs |
25.433 | 1274 rev 1 | Correction on the value range of E-DCH IEs |
25.433 | 1275 | Correction on the value range of E-DCH IEs |
25.433 | 1275 rev 1 | Correction on the value range of E-DCH IEs |
25.433 | 1280 rev 1 | DCH combined when EDCH operation |
25.433 | 1281 rev 1 | DCH combined when EDCH operation |
25.433 | 1282 | Alignment of the RL Specific E-DCH Information IE tabular format to ASN.1 |
25.433 | 1283 | Alignment of the RL Specific E-DCH Information IE tabular format to ASN.1 |
25.433 | 1286 | Optional usage of the E-DCH Reference Power Offset IE |
25.433 | 1287 | Optional usage of the E-DCH Reference Power Offset IE |
25.433 | 1297 | Correction for Synchronised RL Reconfiguration |
25.433 | 1298 | Correction for Synchronised RL Reconfiguration |
25.433 | 1304 | Further Abnormal Conditions for E-DCH |
25.433 | 1305 | Further Abnormal Conditions for E-DCH |
25.433 | 1306 | General Description for E-DCH in RL Setup procedure |
25.433 | 1307 | General Description for E-DCH in RL Setup procedure |
25.433 | 1308 | Introduction of a noise floor indication from Node B for E-DCH RRM |
25.433 | 1308 rev 1 | Introduction of a noise floor indication from Node B for E-DCH RRM |
25.433 | 1308 rev 2 | Introduction of a noise floor indication from Node B for E-DCH RRM |
25.433 | 1316 | Correction for the max repetition of RL Information Response IE in tabular |
25.433 | 1316 rev 1 | Correction for the max repetition of RL Information Response IE in tabular |
25.433 | 1317 | Correction for the max repetition of RL Information Response IE in tabular |
25.433 | 1317 rev 1 | Correction for the max repetition of RL Information Response IE in tabular |
25.433 | 1318 | Correction for the minimum repetition of Mandatory IE in ASN.1 |
25.433 | 1319 | Correction for the minimum repetition of Mandatory IE in ASN.1 |
25.433 | 1322 | Correction to an abnormal case in E-DCH RL ADDITION |
25.433 | 1323 | Correction to an abnormal case in E-DCH RL ADDITION |
25.433 | 1338 | Correction of the Maximum number of logical channel ID |
25.433 | 1339 | Correction of the Maximum number of logical channel ID |
25.433 | 1339 rev 1 | Correction of the Maximum number of logical channel ID |
25.433 | 1358 | Correction of wrong description for E-DCH HARQ process allocation for 2ms TT |
25.433 | 1359 | Correction of wrong description for E-DCH HARQ process allocation for 2ms TT |
25.433 | 1374 | Indication of requested EUL uplink resources from Node B for GBR Radio Bearers |
25.433 | 1482 rev 1 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.433 | 1482 rev 2 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.433 | 1483 rev 1 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.433 | 1483 rev 2 | RL Parameter Update for E-DCH FDD DL Control Channel Information |
25.435 | 0142 | Transport Network CongestionDetection and Control |
25.931 | 0030 | Introduction of E-DCH scenarios |
25.931 | 0030 rev 1 | Introduction of E-DCH scenarios |
page generated from database: 2024-11-12 10:16:04