The 5G Standard

3GPP TDocs (written contributions) at meeting

Meeting: R2-09 - 1999-11-29 to 1999-12-03, Sophia Antipolis

meeting id: R2-09 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R2‑99g87 - - -
R2‑99g89 - - -
R2‑99g90 - - -
R2‑99g91 - - -
R2‑99g92 - - -
R2‑99g93 - - -
R2‑99g94 - - -
R2‑99g95 - - -
R2‑99g96 - - -
R2‑99g97 - - -
R2‑99g98 - - -
R2‑99g99 - - -
R2‑99h00 - - -
R2‑99h01 - - -
R2‑99h02 - - -
R2‑99h03 - - -
R2‑99h05 - - -
R2‑99h07 - - -
R2‑99h08 Introduction of Information Element for Power Control Algorithm - -
R2‑99h09 Inclusion of information elements for integrity protection - -
R2‑99h10 - - -
R2‑99h11 - - -
R2‑99h12 - - -
R2‑99h13 - - -
R2‑99h14 Additional measurements in RRC measurement messages - -
R2‑99h15 - - -
R2‑99h16 - - -
R2‑99h17 Algorithm for CTCF Calculation - -
R2‑99h21 Parameters for CELL UPDATE CONFIRM message - -
R2‑99h22 RRC Initialisation Information - -
R2‑99h23 - - -
R2‑99h25 Modification to the Transport Format Combination Control message - -
R2‑99h26 New Information elements and modifications to messages required in order to support configuration and re-configuration of the DSCH in FDD mode - -
R2‑99h27 Editorial Corrections and Alignments with Layer 1 specifications - -
R2‑99h28 Information elements for TDD shared channel operation - -
R2‑99h29 Description of CN dependent IEs in Master Information Block - -
R2‑99h30 - - -
R2‑99h31 New and corrected CPCH parameters - -
R2‑99h33 - - -
R2‑99h35 - - -
R2‑99h36 - - -
R2‑99h37 Support for DS-41 Initial UE Identity - -
R2‑99h38 - - -
R2‑99h39 - - -
R2‑99h41 - - -
R2‑99h42 - - -
R2‑99h43 - - -
R2‑99h44 - - -
R2‑99h45 - - -
R2‑99h46 - - -
R2‑99h47 - - -
R2‑99h48 - - -
R2‑99h50 - - -
R2‑99h52 - - -
R2‑99h53 - - -
R2‑99h54 - - -
R2‑99h55 Transport format combination set and transport format combination subset - -
R2‑99h56 SDU Discard Functionality - -
R2‑99h57 - - -
R2‑99h58 RRC parameters for SSDT - -
R2‑99h59 - - -
R2‑99h60 - - -
R2‑99h61 - - -
R2‑99h62 - - -
R2‑99h63 - - -
R2‑99h64 - - -
R2‑99h65 - - -
R2‑99h66 - - -
R2‑99h67 - - -
R2‑99h68 - - -
R2‑99h69 - - -
R2‑99h70 - - -
R2‑99h71 - - -
R2‑99h72 - - -
R2‑99H73 - - -
R2‑99h74 - - -
R2‑99h75 - - -
R2‑99h76 Alignment to MAC-c/sh merge - -
R2‑99h77 Alignment with TDD layer 1 - -
R2‑99h78 - - -
R2‑99h79 - - -
R2‑99h80 Corrections and Alignments of the RRC to the L1 for TDD - -
R2‑99h81 - - -
R2‑99h82 - - -
R2‑99h83 - - -
R2‑99h84 - - -
R2‑99h85 - - -
R2‑99h87 - - -
R2‑99h88 - - -
R2‑99h89 - - -
R2‑99H91 Addition of PICH and Corrections for Primary CCPCH - -
R2‑99h92 - - -
R2‑99h93 - - -
R2‑99h94 - - -
R2‑99h95 Radio Interface Functions for Cell Broadcast Service - -
R2‑99h96 - - -
R2‑99h97 Modification of Cell Broadcast Service (CBS) related functions - -
R2‑99h98 - - -
R2‑99h99 - - -
R2‑99i00 Editorial changes on RLC protocol specification - -
R2‑99i01 Updated RLC SDL - -
R2‑99i02 Support for DS-41 Paging UE Identity - -
R2‑99i03 - - -
R2‑99i04 - - -
R2‑99i05 - - -
R2‑99i06 - - -
R2‑99i07 - - -
R2‑99i08 RRC procedure interactions - -
R2‑99i09 - - -
R2‑99i10 - - -
R2‑99i11 Selection of initial UE identity - -
R2‑99i12 - - -
R2‑99i13 UE capability verification in the security mode control procedure - -
R2‑99i14 - - -
R2‑99i15 Actions when entering idle mode - -
R2‑99i17 Specification of inter-frequency and inter-system reporting events for FDD - -
R2‑99i18 - - -
R2‑99i19 - - -
R2‑99i20 CN information elements - -
R2‑99i21 - - -
R2‑99i22 UE information elements - -
R2‑99i23 - - -
R2‑99i24 Other information elements - -
R2‑99i25 - - -
R2‑99i26 - - -
R2‑99i27 - - -
R2‑99i28 - - -
R2‑99i29 - - -
R2‑99i30 - - -
R2‑99i31 - - -
R2‑99i32 - - -
R2‑99i33 - - -
R2‑99i34 - - -
R2‑99i35 - - -
R2‑99i36 - - -
R2‑99i37 - - -
R2‑99i38 - - -
R2‑99i39 - - -
R2‑99i40 - - -
R2‑99i42 - - -
R2‑99i44 - - -
R2‑99i45 - - -
R2‑99i46 - - -
R2‑99i47 Content of Measurement Control Messages - -
R2‑99i48 RRC Information Elements to support Block STTD transmission diversity in TDD - -
R2‑99i49 - - -
R2‑99i50 Removal of compressed mode inband signalling - -
R2‑99i51 - - -
R2‑99i52 - - -
R2‑99i53 - - -
R2‑99i54 - - -
R2‑99i55 - - -
R2‑99i56 - - -
R2‑99i57 - - -
R2‑99i58 - - -
R2‑99i59 - - -
R2‑99i61 - - -
R2‑99i63 - - -
R2‑99i64 - - -
R2‑99i65 - - -
R2‑99i66 - - -
R2‑99i67 - - -
R2‑99i74 - - -
R2‑99i75 - - -
R2‑99i77 - - -
R2‑99i78 - - -
R2‑99i79 - - -
R2‑99i80 - - -
R2‑99i81 - - -
R2‑99i82 - - -
R2‑99i83 - - -
R2‑99i84 - - -
R2‑99i85 - - -
R2‑99i86 - - -
R2‑99i87 - - -
R2‑99i88 - - -
R2‑99i89 - - -
R2‑99i90 - - -
R2‑99i91 - - -
R2‑99i93 RLC Editorial Changes - -
R2‑99i94 - - -
R2‑99i95 - - -
R2‑99i98 - - -
R2‑99j00 Discontinuous reception - -
R2‑99j01 Editorial Modification on RLC specification - -
R2‑99j03 Selection of SCCPCH - -
R2‑99j05 - - -
R2‑99J11 - - -
R2‑99j12 - - -
R2‑99j14 - - -
R2‑99j15 - - -
R2‑99j16 - - -
R2‑99j17 - - -
R2‑99j18 - - -
R2‑99j19 - - -
R2‑99j20 UTRAN response time to uplink feedback commands of TX diversity control - -
R2‑99j21 - - -
R2‑99j22 - - -
R2‑99j23 - - -
R2‑99j24 - - -
R2‑99j25 - - -
R2‑99j26 - - -
R2‑99j27 - - -
R2‑99j28 - - -
R2‑99j29 - - -
R2‑99j30 Physical Channel Parameters - -
R2‑99j31 Support of shared channels and alignment to MAC-c/sh merge - -
R2‑99j33 - - -
R2‑99j34 - - -
R2‑99j35 - - -
R2‑99j36 - - -
R2‑99j37 - - -
R2‑99j38 - - -
R2‑99j39 - - -
R2‑99j40 - - -
R2‑99j41 - - -
R2‑99j42 - - -
R2‑99j43 - - -
R2‑99j44 - - -
R2‑99j45 - - -
R2‑99j47 - - -
R2‑99j48 - - -
R2‑99j49 - - -
R2‑99j50 - - -
R2‑99j51 - - -
R2‑99J52 - - -
R2‑99j53 - - -
R2‑99j54 - - -
R2‑99j55 - - -
R2‑99j56 - - -
R2‑99j57 - - -
R2‑99j58 - - -
R2‑99j59 - - -
R2‑99j60 - - -
R2‑99j61 - - -
R2‑99j62 - - -
R2‑99j63 - - -
R2‑99j64 - - -
R2‑99j65 - - -
R2‑99j66 - - -
R2‑99j68 - - -
R2‑99j70 Security mode control procedure - -
r2‑99j72 - - -
R2‑99j73 - - -
R2‑99j74 - - -
R2‑99j75 - - -
R2‑99j76 - - -
R2‑99j77 - - -
R2‑99j78 Value range for Measurement Information Elements - -
R2‑99J79 - - -
R2‑99J80 Routing of NAS messages in UTRAN - -
R2‑99j82 - - -
R2‑99j83 Information elements for cell selection and reselection - -
R2‑99j84 Introduction of a SCCH procedure - -
R2‑99j85 Support of physical channel establishment and failure criteria in the UE - -
R2‑99j86 Compressed mode parameters without gating - -
R2‑99j87 Compressed mode parameters with gating - -
R2‑99j88 - - -
R2‑99j89 RRC Initialisation Information - -
R2‑99j90 DPCH initial power - -
R2‑99j91 RRC Connection Establishment parameters - -
R2‑99j92 Signalling radio bearers - -
R2‑99j94 SAPs and Primitives for DS-41 mode - -
R2‑99j95 Merging the hard handover and some radio bearer control procedures - -
R2‑99j96 System information on FACH - -
R2‑99j97 Transfer of UE capabilities - -
R2‑99k02 - - -
R2‑99k03 - - -
R2‑99k04 - - -
R2‑99k05 - - -
R2‑99k06 Measurement of Transmitted carrier power - -
R2‑99k07 - - -
R2‑99k08 Introduction of network control of UE measurement activities - -
R2‑99k09 - - -
R2‑99k10 - - -
R2‑99k11 - - -
R2‑99k12 Editorial issues - -
R2‑99k13 Editorial issues - -
R2‑99k14 - - -
R2‑99k15 - - -
R2‑99k16 - - -
R2‑99k17 - - -
R2‑99k18 - - -
R2‑99k19 Editorial corrections regarding CTCH - -
R2‑99k20 Support of shared channel operation in TDD - -
R2‑99k21 - - -
R2‑99k22 Editorial changes - -
R2‑99k23 Editorial changes - -
R2‑99k25 Change to one PU in a AMD PDU - -
R2‑99k26 - - -
R2‑99k27 - - -
R2‑99k28 RRC signalling for PDCP - -
R2‑99K29 - - -
R2‑99k30 - - -
R2‑99K31 Integration of Cell Broadcast Service (CBS) - -
R2‑99k32 RRC Connection Re-establishment - -
R2‑99k33 Inter-frequency measurements and reporting - -
R2‑99k34 Support of UE autonomous update of a active set on a non-used frequency - -
R2‑99k35 Inter-system measurements and reporting - -
R2‑99k36 - - -
r2‑99k37 Message contents for inter system handover to UTRAN - -
R2‑99k38 Addition of cell access restriction information elements to System Information - -
R2‑99k39 TPC combining for power control - -
R2‑99k40 TX Diversity Mode for Dedicated Channel - -
R2‑99k41 Integration of Cell Broadcast Service (CBS) - -
R2‑99k42 Provide necessary signalling to support FDD DSCH - -
R2‑99k43 Radio bearer, transport channel and physical channel information elements - -
R2‑99k44 - - -
R2‑99k45 Updates of the system information procedure - -
R2‑99k46 Selected RRC message transfer syntax - -
R2‑99K47 Signalling connection release - -
R2‑99k48 Editorial Modification of IEs in RRC messages - -
R2‑99k49 Support for cdma2000 Hard Handover - -
R2‑99k50 RACH message length signaling on System Information - -
R2‑99k51 Measurement used as a quality estimate for cell selection and reselection - -
R2‑99k52 - - -
R2‑99k53 Modified MAC header field sizes - -
R2‑99k54 Editorial issues - -
R2‑99k55 - - -
R2‑99k56 - - -
R2‑99k57 - - -
R2‑99k58 - - -
R2‑99k60 - - -
R2‑99k61 Editorial issues - -
R2‑99k62 - - -
R2‑99k63 Barred Cells and Access Control - -
R2‑99k64 - - -
R2‑99k66 - - -
R2‑99k67 - - -
R2‑99k68 Corrections to RRC State Names - -
R2‑99k69 - - -
R2‑99k70 Change in RLC control PDU format - -
R2‑99k71 RLC editorial corrections - -
R2‑99k72 Introduction of RLC suspend state - -
R2‑99k73 - - -
R2‑99k74 - - -
R2‑99k75 - - -
R2‑99k76 - - -
R2‑99k77 Modification and editorial changes - -
R2‑99k78 Specification of Cell reselection procedures in Connected Mode - -
R2‑99k79 - - -
R2‑99k80 - - -
R2‑99k81 - - -
R2‑99k82 - - -
R2‑99k83 - - -
R2‑99k84 - - -
R2‑99k86 Measurement of Physical Channel BER - -
R2‑99k87 Simultaneous mapping of logical channels on transport channels - -
R2‑99k88 Efficient rate command signalling - -
R2‑99k90 - - -
R2‑99k91 - - -
R2‑99k92 - - -
R2‑99k93 - - -
R2‑99k94 - - -
R2‑99k95 - - -
R2‑99K96 - - -
R2‑99k97 - - -
R2‑99k98 - - -
R2‑99k99 Open loop power control for PRACH - -
R2‑99L00 - - -
R2‑99L01 TBS Identification in TFS - -
R2‑99L02 Gain Factors - -

page generated from database: 2024-04-13 13:51:47

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links